Hide Garbage Bins Outside (Cedar Shed Plans)
A cedar bin shed can screen garbage and recycling bins without trapping damp air or blocking collection-day access. Measure the largest bin, allow room for its lid and handles, and check the route through the doors. Before building, confirm local rules for setbacks, permits, height, and fire separation; small enclosures are not automatically exempt.
Bins look out of place beside a garden or driveway, but a shed that hides them too tightly can make daily use awkward. The goal is a cedar screen that keeps bins out of sight while letting air move, water drain, and wheels roll freely.
I start with the bins and their route, not a standard shed plan. Bin sizes, property rules, and site grades vary. Use the measurements below as design targets, then confirm the details with your local building or zoning office before setting the footprint.
Planning the Cedar Bin Enclosure and Checking Local Rules
A cedar bin enclosure is a small outdoor structure designed around the bins it will hold. Its location and size should account for property lines, nearby buildings, access, drainage, and local rules. There is no universal shed size, setback, or ventilation rate that applies to every yard.
First, check with your local authority having jurisdiction (AHJ), meaning the office that applies building and zoning rules where you live. Ask whether the enclosure needs a permit and what rules apply to setbacks, height, accessory structures, and fire separation. Do this before buying materials or fixing the footprint.
A small shed is not automatically free from setback or fire rules. Requirements can depend on how local rules classify the structure and how close it is to a property line or another building. Do not rely on a generic online plan to settle those questions.
Then survey the site:
- Mark property lines, easements, buried utilities, nearby structures, and the proposed door swing.
- Look for low spots and note where rainwater flows.
- Check that the route from the enclosure to collection day storage is firm and easy to roll along.
- Ask the utility locating service in your area to mark buried lines before digging or placing anchors.
Keep roof runoff on your property and away from the base. If the site slopes, plan a level base that does not send water onto a neighbor’s land. Next step: confirm the location with the AHJ and any required utility-marking service before construction.
Sizing the Interior, Doorway, and Bin-Removal Route
Clear interior space is the usable space between the inside faces of the walls. Measure the largest bin, including its lid and handles, then add room for movement. As a design target, allow 12 inches beyond the bin’s width and depth for the clear interior dimensions, and make the clear doorway at least 6 inches wider than the bin.
Measure the actual bins you will store. Do not use the listed capacity in gallons as a substitute for outside dimensions. A lid may extend beyond the body, and handles or wheels may affect how the bin turns. Also check whether the lid can open fully inside the shed.
| Item to measure | Design target | Why it matters |
|---|---|---|
| Clear interior width | Bin width + 12 in | Allows space beside the bin |
| Clear interior depth | Bin depth + 12 in | Allows room for placement and lid use |
| Clear door width | Bin width + 6 in | Helps the bin pass through the opening |
| Siding clearance above soil | At least 6 in | Helps keep cedar siding out of soil contact |
These are planning targets, not code minimums. Measure the narrowest point of the door opening, including stops, hinges, and hardware. Then test the route: a bin that fits through a doorway on paper may still be hard to steer around a wall, step, or sharp turn.
Avoid a raised threshold that forces you to lift a full bin. Aim for a firm, level transition from the path into the shed. If the bins must turn, mark the turn on the ground with tape or stakes and try rolling them through before building. Next step: draw the footprint and door opening to scale, then check the full removal path with the actual bins.
Framing, Ventilating, and Finishing the Cedar Shed
A ventilated cedar shed has gaps or openings that let air move through it. Distributed openings high and low, or steady gaps between horizontal boards, help prevent the enclosure from being tightly sealed. There is no general passive-ventilation CFM requirement for an unconditioned bin shed.
Build a square, braced frame on a stable, level, drained base. Choose a base suited to the site and local rules; it must support the structure without trapping water around the bottom. Keep cedar siding at least 6 inches above soil as a durability target, not a universal code rule. Do not place cedar or untreated framing directly in soil.
For horizontal cladding, common nominal 1×6 cedar boards are about ¾ by 5½ inches in actual size, but check the supplier’s measurements. A gap of about ⅛ inch between boards can allow for movement, unless the board profile or maker’s instructions call for something else. A continuous ½-inch gap between horizontal boards is another ventilation approach. Do not block the openings with trim or stored items.
Use stainless-steel or hot-dip-galvanized fasteners that are compatible with cedar. Incompatible metal can corrode or stain the wood. Choose hinges and latches with published ratings for the completed door’s weight and outdoor exposure. Use at least two hinges per door, and follow the hardware maker’s limits and instructions; there is no single hinge rating that suits every door.
A sloped roof should shed water away from the base. Keep the structure braced and anchor it where the site or local rules require. Next step: check the frame for square, confirm cladding gaps stay open, and verify that roof runoff will not pool at the base.
Practical Site Examples: Apply the Plan to Your Yard
Site examples show how measurements change the layout; they are planning illustrations, not documented projects or code approvals. A useful plan follows the actual bin size, ground conditions, and door route rather than copying one fixed shed design.
Two bins beside a straight path: Measure both bins and place them side by side on the drawing. Add clearance around the largest bin, then check that both lids open and the doors provide the needed clear width. If the approach is straight, a single wide opening may suit the route, but select door hardware for the door’s finished weight.
A bin enclosure near a fence: Do not assume the fence makes the space exempt from rules. Confirm the property line, required setback, and any fire-separation rules with the AHJ. If the allowed location is narrow, recheck the bin-removal route before reducing the interior clearance.
A sloped or wet corner: A shed placed in a low spot may keep collecting water even if its roof sheds rain well. Compare the proposed base with the surrounding grade, plan a level, drained surface, and direct runoff so it stays on your property. Keep the siding above soil and make sure the approach remains usable when wet.
These examples share one rule: solve access and drainage before choosing the final footprint. Next step: use a full-size ground layout to test the door swing, bin turn, and base position.
Verifying Drainage, Door Operation, and Code Compliance
A final check means testing the finished shed with the bins in place. Confirm the doors open fully, the bins roll out without lifting, the ventilation openings remain clear, and rainwater drains away from the structure. Then confirm that the built location and design match any direction from the AHJ.
Before regular use, check each item:
- Open and close each door with the bins inside.
- Roll every bin through its usual route; check for snags at the opening and threshold.
- Confirm the lid can open as needed and does not hit the roof or frame.
- Check that latches hold and hinges operate without binding.
- Look under the base after rain for pooling or runoff flowing toward a neighboring property.
- Make sure vents are not blocked by stored items, trim, or debris.
- Keep the shed’s location, height, and openings consistent with the rules you confirmed.
If the structure changes later, such as adding a roof extension or moving it closer to a boundary, ask the AHJ whether the change affects approval. Next step: keep your measurements, product instructions, and local guidance with the project notes for future repairs.
Frequently Asked Questions
These answers cover common planning questions for a cedar enclosure used to hide outdoor garbage and recycling bins. Local rules vary, so treat dimensions as design guidance and confirm permit, setback, and fire questions with your AHJ before construction.
How much larger should a cedar bin shed be than the bins?
As a design target, allow 12 inches beyond the largest bin’s width and depth for the clear interior. Measure the bin, lid, and handles first.
How wide should the shed door be?
Target a clear doorway at least 6 inches wider than the bin. Check the narrowest point after accounting for hinges, stops, and other hardware.
Does a small garbage-bin shed need a permit?
It depends on local rules. Ask your AHJ about permits, setbacks, height limits, accessory-structure rules, and fire separation before choosing the location.
How can I ventilate a cedar bin enclosure?
Use continuous gaps between horizontal cladding boards or distributed openings high and low. Keep them clear; there is no universal passive CFM requirement for this type of shed.
Can cedar siding touch the ground?
Avoid direct soil contact. A useful durability target is at least 6 inches between the bottom of the cedar siding and the soil.
What fasteners work with cedar?
Use stainless-steel or hot-dip-galvanized fasteners compatible with cedar. Check the product instructions to help avoid corrosion or staining.
How many hinges should each door have?
Allow at least two hinges per door, then follow the hardware maker’s limits and guidance for the door’s weight and exposure.
Should I build a raised threshold?
Avoid a threshold that makes you lift a full bin. Aim for a firm, level transition that lets the bin roll through.
How do I keep rain from collecting around the shed?
Use a stable, level, drained base and direct roof runoff away from it. Keep runoff on your property and do not send it onto a neighbor’s land.
Can I place the enclosure beside a fence?
Only after checking the property line and local rules. A small enclosure may still be subject to setback or fire-separation requirements.
(This article was written by one of our staff writers, David Sinclair. Visit our Meet the Team page.)





