Hide Curtain Runners (Pelmet Board Ideas)

A pelmet board hides curtain tracks and runners behind a neat, finished edge while letting curtains move and tracks stay reachable. Measure the installed system, allow room for fabric and moving parts, and test the full curtain run before finishing the board. Choose a fixed, removable, or hinged design to suit your access needs and room style.

A visible track can interrupt a calm, finished window design. A well-planned pelmet conceals the runners without making the curtains harder to use or the track difficult to repair. It can also be a practical, good-value upgrade: a simple board, suitable fixings, and a painted or upholstered finish may be enough to create a more integrated look.

The key is to design around the curtain system, not just the appearance of the board. Measure the track and the curtain in use, leave a clear route for movement, and plan how you will reach the hardware later.

Plan around the installed curtain track

A pelmet is a box, board, or shaped cover fitted above a window to conceal curtain hardware. The track is the rail the runners move along; runners, also called carriers, hold the curtain. Plan the cover around the full operating area of these parts, including the curtain as it hangs.

Start by operating the curtains from fully open to fully closed. Note the track ends, end stops, carrier movement, curtain folds, and where the fabric gathers when open. Measure the actual system in place, rather than relying only on a track catalogue dimension.

Check the wall or ceiling material where the pelmet will be fixed. Also note nearby window handles, radiators, supply or return grilles, and any access points that must remain usable. Before drilling, identify hidden services and choose fixing locations in sound substrate.

There is no universal IRC or IBC dimension for a domestic curtain pelmet. Follow locally adopted building and fire codes, along with the track and curtain manufacturers’ instructions. IRC R302.11 fireblocking applies only where the work creates a concealed space covered by that provision; a shallow pelmet does not automatically require it.

Choose a pelmet style that suits the room

The best pelmet design hides the track from normal views while leaving enough room to operate and service it. A straight painted board suits many modern interiors, while a fabric-covered face can coordinate with curtains. The right choice depends on the window, the track, and how often you may need access.

Pelmet ideaUseful whenAccess approachDesign note
Fixed, painted boardYou want a simple, clean lineKeep a track end reachable, if practicalMatch the wall for a quiet look
Board with removable faceYou expect to inspect or adjust the trackRemove the face for serviceUse secure, suitable fixings that can be undone
Hinged or lift-off panelThe track needs wider accessOpen or remove the panelCheck that the panel clears curtains and nearby fittings
Fabric-covered pelmetYou want a softer finishMake the face removable where possiblePlan fabric returns so they do not catch the curtain
Full-width box with returnsYou want to conceal the ends as well as the trackProvide an access route at an end or through a panelCheck each return against curtain stack-back

A return is the short side that turns from the front of a pelmet back toward the wall. Returns can hide the track ends, but they can also interfere with curtains that gather near the sides. Measure the curtain in its open position before deciding how deep or long to make them.

Size the pelmet for movement and clearance

The internal envelope is the clear space inside the pelmet. Size it from the most projecting parts of the installed track, carriers, hooks, and hanging curtain, then check the allowance along the full run. These measurements are starting allowances, not universal code dimensions.

Use these minimum design allowances as a starting point:

  • At each side: Allow at least 25 mm beyond each end of the measured operating track and carrier envelope. Add more if the end stops, adjustment points, or curtain stack-back need it.
  • In depth: Allow at least 25 mm beyond the farthest projection of the track, carriers, hooks, and hanging curtain. Check with the curtain installed.
  • Above moving parts and fabric: Allow at least 10 mm between them and the inside of the pelmet as a starting point. Run the curtain through its full travel to verify the gap.
MeasurementWhat to measureStarting allowance
Side clearanceOperating track and carrier envelope at each endAt least 25 mm beyond each end
Internal depthFarthest projection, including hanging fabricAt least 25 mm beyond it
Vertical running clearanceMoving parts and fabric to pelmet interiorAt least 10 mm
Service openingTrack, carriers, end stops, and fixings that need inspectionLarge enough for the actual work

Do not treat the allowances as a substitute for a mock-up. Curtains can fold, bow, or sit differently from the track alone. If fabric approaches the board, increase the clearance before you cut or finish the pelmet.

There is no universal access-opening size. The opening must let you inspect and service the specific track, carriers, end stops, and fixings. A removable face or bottom panel can provide access; an accessible track end may work where the system allows it.

Build and test the board in stages

A staged installation helps catch snags before paint, fabric, or trim makes changes harder. A practical board material is 18 mm plywood, but the support and fixing method must suit the complete assembly and the wall or ceiling substrate.

  1. Survey the window. Measure the installed track, end stops, carrier travel, curtain drop, and stack-back. Record the planned board position, nearby services, window operation, and any heat or ventilation equipment.
  2. Mark the internal envelope. Draw the intended clear space on the wall or make a simple temporary template. Check the side, depth, and vertical allowances against the curtain in both open and closed positions.
  3. Mock up the cover. Use a temporary straight edge or sample board to test the proposed face and returns. Move the curtain across its full run. Increase the space wherever fabric, hooks, or carriers approach the pelmet.
  4. Frame and fix. Build a straight, adequately supported board. Select fixings for the substrate and the complete assembly. Follow the fixing manufacturer’s stated load capacity and installation conditions; a generic fastener rating is not the capacity of the finished pelmet.
  5. Preserve adjustment and removal points. Avoid covering track fixings or any mechanism that the manufacturer says needs access. Plan a removable face, bottom panel, or reachable track end before closing the assembly.
  6. Finish, then test again. After adding the face, returns, lining, paint, or upholstery, run the curtains end to end once more. Confirm that the track remains reachable for inspection and service.

Do not rely on plasterboard alone unless the chosen fixing system is specifically rated for the actual load and substrate. If the fixing location or wall construction is uncertain, verify it before installation rather than assuming a standard screw will hold the assembly.

Protect airflow and required access

A pelmet should conceal curtain hardware, not block equipment that needs air or service access. A cover near a radiator or HVAC grille can affect heat dissipation or airflow. There is no single clearance or airflow figure that applies to every system, so check the appliance or grille manufacturer’s requirements.

Keep the air path clear, and do not cover a required supply outlet or return grille. Also confirm that the pelmet does not obstruct a window handle, restrict the window’s operation, or conceal an access point that must remain available. If clearances are unclear, seek guidance for the specific appliance or ventilation system before building around it.

Two practical pelmet design examples

These examples show how the measurements and access choices can guide a design. They are planning scenarios, not tested performance claims; confirm all dimensions against the installed curtain system and the relevant manufacturers’ instructions.

Example 1: A wide living-room window. The curtains gather near both ends, so a narrow board with short returns may hide the track but leave the fabric visible from an angle. I would measure the stack-back first, then extend the internal envelope to clear it. A removable face can preserve access if the track needs adjustment later.

Example 2: A bedroom with a deep curtain heading. The hooks and fabric project farther toward the room than the track itself. Measuring only the rail could make the finished board too shallow, allowing the curtain to rub. I would measure the farthest projection with the curtain hanging, add the starting depth allowance, and test the full run before finishing.

In both examples, the decision begins with use and access, then moves to appearance. A board that looks seamless but catches fabric or traps the track is not a successful concealment.

FAQ: curtain pelmets and track access

These answers cover common decisions when planning a pelmet board. Actual clearances depend on the installed track, curtain, substrate, and nearby equipment, so treat the measurements below as starting allowances and verify them on site.

How much space should I leave at each end of a pelmet?

Allow at least 25 mm beyond each end of the measured operating track and carrier envelope. Increase that space if the end stops, curtain stack-back, or adjustment points need more room.

How deep should a pelmet board be?

Measure the farthest projection of the track, carriers, hooks, and hanging curtain. Allow at least 25 mm beyond it as a starting point, then test the curtain through its full run.

How much vertical clearance does a curtain need?

Use at least 10 mm between moving components or fabric and the inside of the pelmet as a starting allowance. Verify that nothing snags once the face and any lining are fitted.

Can I make a pelmet that cannot be removed?

You can use a fixed board if the track remains accessible through an end or another opening. Do not permanently box in the track if doing so prevents required inspection, adjustment, or service.

What is the best material for a pelmet board?

An 18 mm plywood board is a practical option. Support it adequately and select fixings for the substrate and full assembly, following the fixing manufacturer’s installation instructions.

Can a pelmet cover a radiator or air grille?

Do not block a required air outlet or return. Near a radiator or HVAC grille, check the relevant manufacturer’s clearance and airflow instructions because requirements vary by system.

Does a curtain pelmet need fireblocking?

Not automatically. There is no universal domestic pelmet dimension, and IRC R302.11 fireblocking applies only where the work creates a concealed space covered by that provision. Follow locally adopted code requirements.

How do I know whether the curtain will catch?

Mock up the planned internal envelope and operate the curtain fully open and closed. Check the fabric, hooks, and carriers at the ends as well as along the middle of the track.

A successful pelmet hides the runners without hiding problems. Measure the curtain in use, allow room for its full movement, and keep a practical route to the hardware. With those checks in place, a simple board can give the window a cleaner finish while keeping the track usable and serviceable.

(This article was written by one of our staff writers, Michael Donovan. Visit our Meet the Team page.)

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *