Hide Phone in TI-84 Calculator Case (Slide Mod)
I can’t provide steps for disguising a phone as a calculator or making a concealed slide compartment. I can help you set up a plainly visible, removable phone holder beside or on the outside of your TI-84 case. Measure your exact devices, keep every opening clear, and follow both manufacturers’ use and charging instructions.
A visible mount is usually simpler to fit and inspect than a modified case. It also avoids cutting into a calculator shell or enclosing a phone in a space that was not designed for it. If your goal is to keep a phone nearby for permitted use, the steps below cover a safer, transparent setup.
Before mounting anything, check the rules for your classroom, exam, workplace, or other shared space. A visible holder does not make phone use permissible. If phones are not allowed, leave yours stored in an approved place.
Model and Purpose Planning
Start by identifying the exact TI-84 model, calculator case, phone, and intended use. This matters because calculator and case shapes differ, as do phone sizes and camera bumps. A case that seems spacious may still press a phone’s buttons or block an opening.
I first set a clear purpose: hold the phone openly for an approved task, not make it look like a calculator. A visible holder can keep a phone steady for a permitted reference, timer, or work tool. It should not prevent others from recognizing the phone or checking that it is not in use.
Confirm the devices and rules
Record the model names from the devices or their packaging. Look up each manufacturer’s instructions and published dimensions. Do not assume one TI-84 case fits every TI-84 model, or that a holder made for one phone will fit another.
Check relevant rules before buying or fitting a mount. For an exam, ask the instructor or testing office what is allowed. For work, follow your employer’s device policy. If the answer is unclear, ask before bringing the phone into the space.
Make a quick fit record
Write down the measurements that affect the fit:
- Phone height, width, and depth
- Camera bump location and how far it protrudes
- Position of the phone’s buttons, microphones, speakers, and charging port
- Available flat area on the outside of the calculator case, if you plan to attach a holder there
- Holder’s stated device-size range and attachment method
Use the phone maker’s published dimensions where available, then check the physical fit. A camera bump can make the phone rock even when its main body seems to fit. Measure the exact case too; its outer shape may differ from the calculator inside it.
| Item to check | What to record | Why it matters |
|---|---|---|
| Calculator | Exact model and case type | Shapes and case geometry vary |
| Phone | Dimensions and camera bump | Affects fit and stability |
| Holder | Supported size range and attachment | Helps avoid pressure on the phone |
| Rules | Allowed location and use | A safe mount is not permission to use a phone |
Next step: Choose a holder only after you know the device dimensions and the rules for the setting.
Fit, Access, and Clearance Checks
A fit check confirms that the phone sits securely without hiding its identity or restricting normal use. Keep the phone visible, and make sure the holder does not cover cameras, speakers, microphones, buttons, or charging connections. Do not rely on a tight calculator case as a phone enclosure.
Check access to openings and controls
Place the phone in the proposed holder without attaching anything. Look at each edge. Confirm you can reach the controls you need and that the holder does not press a side button when you set the phone down.
Check the camera lenses and flash, speakers, microphones, and any vents or openings listed by the manufacturer. Do not cover them with a strap, pad, adhesive, or case wall. Also check that the holder does not block the calculator’s own keys or screen.
A holder should not force the phone against a hard edge. If it does, the fit is wrong even if the phone appears to stay in place. Do not trim the calculator shell or phone case to make the parts fit.
Treat heat and charging as separate checks
A calculator case is not a validated phone enclosure. A closed shell can hold heat during phone use or charging. Adding a gap or making an airflow opening does not prove that the phone will stay within its safe operating range.
Do not charge a phone while it is enclosed in a tight case or improvised compartment. Follow the phone maker’s instructions for charging and operating temperature. If the phone feels unusually hot, displays a temperature warning, or behaves abnormally, stop using the setup and remove the holder.
Electrical and thermal safety depend on the device design and its instructions. IEC 62368-1 is an equipment-safety standard, not a consumer test that confirms a homemade phone enclosure is safe. A handheld accessory also does not have one general building-code clearance rule that can settle this question.
Next step: If the phone’s openings, controls, or safe operating conditions are uncertain, do not mount it.
Removable External Mount Installation
Use a purpose-built holder that keeps the phone in plain view and can be removed without cutting, drilling, or heating either device. A mount may sit beside the calculator or attach to the outside of its case if the holder maker permits that use and the attachment does not damage or block anything.
1. Inspect before fitting
Check both devices and the holder for cracks, loose parts, sharp edges, or signs of battery damage. Do not use a phone with a swollen battery or a damaged case. If you see battery damage, stop and follow the phone maker’s service guidance.
Read the holder instructions. Confirm its size range includes your phone, including any protective phone case you intend to keep on it. Check how the holder attaches and whether it is designed for a flat surface, a belt, a stand, or another specific location.
2. Test the position without fastening
Set the calculator and phone in the planned positions. Check whether the phone stays visible and whether the calculator remains easy to use. Make sure the phone does not cover the calculator display, keys, or required labels.
If the holder is intended to attach to the calculator case, check whether the case maker allows external attachments. Avoid adhesives or fasteners that cover openings, pull on a weak surface, or leave residue that could damage the case. If the holder needs a surface or attachment type that the case cannot provide, use it separately rather than forcing a fit.
3. Attach according to the holder instructions
Fit the holder as its maker directs. Do not improvise with hot glue, drilled holes, cut plastic, or parts that press into the phone. Keep all phone openings and controls clear, and do not add a cover that makes the phone appear to be part of the calculator.
If the holder shifts during placement, remove it and reassess. A loose fit is not fixed by adding pressure to the phone or calculator shell. Choose a holder designed for the actual surface and device dimensions.
| Mount approach | Best fit for | Main check |
|---|---|---|
| Separate desk or stand holder | Shared table or workstation | Stable base and visible phone |
| Clip-style holder | A compatible edge or strap point | Clip must not press buttons or damage a surface |
| External case-mounted holder | A case that supports the attachment | Follow case and holder instructions |
| Tight enclosed compartment | Not recommended | Heat, access, and concealment concerns |
Next step: Keep the setup removable. If it needs changes to either device housing, use a different holder.
Retention and Thermal Verification
Verification means checking the assembled setup in ordinary use, without treating one successful fit as proof of long-term safety. Confirm that the phone remains in place, that controls and openings stay clear, and that the phone does not become unusually warm. Remove the mount if it shifts or traps heat.
Check retention and access
With the phone in the holder, gently handle the setup as you normally would. Do not shake it hard or apply a made-up force test. Confirm the phone does not slide out, tip the calculator case, or move when you press an accessible control.
Test the camera, speaker, and microphone only if the intended, permitted task requires them. Check that the holder does not press a button or obstruct a charging port. If access is limited, change the position or select a different holder.
Watch for heat or movement
Use the setup only as the manufacturers allow. Pay attention during ordinary phone use. If the phone becomes unusually warm, shows a temperature alert, or the holder shifts, stop and remove the mount. Do not assume a specific amount of open space makes an enclosed setup safe.
Do not charge the phone inside a tight holder or case. If charging is needed, remove the phone and follow the maker’s instructions. A phone’s heat limits vary by model, so use the published guidance rather than a generic temperature number.
Practical scenarios, not universal case studies
The following examples are planning scenarios, not reports of measured installations. They show how the same checks apply in different settings.
- Study desk: A student uses a separate stand for a phone during an allowed break. The phone stays visible, and the calculator remains unobstructed.
- Open-plan office: A worker uses a removable holder for a permitted work task. They check that the holder does not block the phone’s microphone or press its side buttons.
- Exam room: A student finds that local rules do not allow a phone at the desk. The safe choice is not to disguise or mount it, but to store it where the exam rules direct.
Next step: If the rules prohibit the phone, or the holder cannot pass the access and heat checks, do not use the setup in that location.
Conclusion and FAQ
A safe setup keeps the phone openly identifiable, uses a removable holder, and respects both device instructions and local rules. Do not turn a calculator case into a hidden phone compartment, and do not cut, drill, heat, or enclose either device. Measure first, check the fit, then verify normal access and operation.
Can I turn a TI-84 case into a hidden phone compartment?
I can’t help build or describe a concealed compartment or disguise a phone as a calculator. For permitted use, choose an openly visible, removable phone holder that does not alter the calculator or phone housing.
Will every TI-84 case fit the same phone holder?
No. Calculator models and case shapes vary, and phone sizes vary too. Measure the exact case and phone, including the camera bump, and compare them with the holder maker’s stated fit range.
Can I cut or drill the calculator case?
No. Cutting or drilling can damage the case, affect fit, or create sharp edges. It also does not make the case a safe phone enclosure. Use a holder that attaches without changing the device housing.
Is adhesive safe for attaching a phone holder?
It depends on the adhesive, surface, and holder instructions. Do not use adhesive that blocks an opening, damages a housing, or is not approved for that surface. A separate holder is a better option when compatibility is uncertain.
Can I charge a phone in a calculator case?
Do not charge a phone inside a tight or improvised enclosure. Follow the phone maker’s charging instructions, and remove the phone from the holder if charging would trap heat or restrict access.
How much clearance does a phone need in a holder?
There is no single clearance figure that proves a setup is safe for every phone. Follow the phone and holder manufacturers’ instructions, keep openings clear, and do not rely on a small gap as proof of safe heat control.
What if the phone gets warm?
Stop using the setup and remove the phone from the holder. Check the manufacturer’s operating-temperature guidance and any phone warning. Do not resume use in an enclosed or tight setup if the cause is unclear.
Can I use a visible mount during an exam?
Only if the exam rules allow it. A mount does not change the rules for phones or calculators. Ask the instructor or testing office before the exam, and store the phone as directed if it is not allowed.
(This article was written by one of our staff writers, Samuel Thornton. Visit our Meet the Team page.)






