Hide Valuables in Porsche 987 (Rear Cubby Stash)

For a Porsche 987, use the rear cubby only after checking the exact car, then choose a commercially made lockable container that fits without force. Secure it only to a verified, approved attachment point. Do not drill into trim or rely on untested fasteners. A lock may deter casual access, but it does not make valuables theft-proof.

If you want to keep small items together in a 987’s rear cubby, the key is a safe fit, not a secret compartment. A customizable container can suit the items you carry, but the car’s year and body style affect what fits and where you can attach it. Start with the owner’s manual, then confirm the location and attachment method before buying or installing anything.

I use a simple rule: if I cannot verify what is behind a panel or identify a rated attachment point, I do not fasten a box there. A neat-looking install is not worth risking wiring, restraint parts, or service access. The steps below help you assess the rear cubby and choose a practical, removable setup.

Plan Around the Specific 987 Configuration

This section explains why you must identify your exact Porsche before selecting a container or mounting method. Rear-cubby dimensions, nearby parts, and possible attachment points can vary by model year and body style. There is no reliable universal measurement or load rating to use for every 987, so inspect your vehicle rather than relying on a general fit claim.

Start by recording the model year and body style. Check the owner’s manual for information about the storage area, nearby equipment, and any warnings about loading or access. If the proposed setup requires taking trim apart, consult the applicable Porsche workshop information or a qualified technician before proceeding.

Measure the usable opening and depth of the cubby on your own car. Note any curves, lips, lids, cables, or other features that reduce space. Measure the container too, including its lock and hinges. It should sit in place without bending, pinching, or forcing any part of the car.

A container marketed for a “Porsche 987” may still not suit your particular car. Ask the seller for exact product measurements and documented fit or attachment details. Treat vague claims such as “fits most models” as a reason to verify, not as proof.

Before ordering, make a short list of what you intend to store. A few small items may fit in a compact box, while bulkier items may make the cubby hard to use. Avoid packing the box so full that the lid cannot close or the container presses against nearby parts.

Next step: Confirm the year, body style, opening, depth, and clearances before choosing a container.

Check Access, Restraints, Wiring, and Ventilation

Before installation, check that the proposed container and its mounting method will not block vehicle systems or service access. Trim can cover wiring or restraint parts, even when it looks like a simple panel. Keep seat-belt hardware, airbag zones, vents, electrical components, controls, and service areas clear. If you cannot identify what is behind a surface, do not drill or fasten there.

Use the owner’s manual and the correct workshop documentation for your model year. Look for guidance about nearby systems and trim removal. Do not guess where wiring or restraint parts are located from appearance alone. A panel that looks solid may conceal equipment, and an incorrect hole or fastener can cause damage, system faults, or injury.

Keep the proposed container away from seat-belt parts and any area that could affect airbag deployment. Do not attach anything to a restraint component or cover a warning label. Keep factory vents open, too. There is no generic airflow or CFM target for an ordinary storage box; the practical rule is to leave the car’s existing vents unobstructed.

Also consider routine use. The box must not interfere with opening the cubby, reaching controls, moving seats, or accessing items that need service. If installation would require removing a panel, first confirm that the work is permitted and that you can restore the panel correctly. When in doubt, ask a Porsche-qualified technician to inspect the location.

Stop condition: If you cannot positively identify the attachment point and the area behind it, do not install there.

Install a Rated, Non-Structural Storage Solution

Choose a commercially made, lockable container that fits without cutting or altering the car. “Rated” means the maker states what the product or attachment is designed to do and provides supporting details. Use only a mounting method documented as compatible with your car and its approved attachment point. Do not treat carpet, trim, or an unknown factory fastener as a load-rated anchor.

Compare options based on fit, access, and evidence of compatibility. A lockable box that sits in the cubby without a secure, approved attachment may still slide in a sudden stop. A mount that seems strong but uses an unverified screw or panel is not a safe upgrade. If no suitable, documented attachment method exists, use the container without modifying the car only if it can be kept from shifting safely; otherwise, do not use that setup while driving.

OptionWhat it can offerMain concernBest next step
Freestanding lockable boxKeeps small items together; no drillingMay shift if not retainedConfirm it cannot move and does not block access
Container with documented vehicle fitMay provide a more direct fitProduct claims may not cover your year or body styleVerify exact compatibility and attachment details
Custom or modified mountCan be tailored to a spaceMay affect wiring, trim, or structural partsUse only with verified design and qualified installation
Loose items in the cubbyNo installation neededItems can move and are not lockedAvoid storing valuables this way

Do not drill into structural members, restraint parts, or unidentified trim. Do not use adhesive, straps, or improvised brackets as a substitute for a verified attachment method. Without Porsche documentation for the exact configuration, no universal load rating can be assigned to the cubby, trim, or factory fasteners.

A lock is useful for keeping a container closed and may deter casual access. It cannot guarantee that a thief will not take the whole box or enter the vehicle. Do not leave high-value items in the car just because they are inside a locked container. Check your insurance terms if the value or type of item makes that relevant.

Next step: Buy only after the container and its approved mounting method are confirmed for your car.

Verify Retention and Unobstructed Vehicle Systems

After installation, check the container before driving and again after its first use. Retention means the box stays in its intended position during normal vehicle use. Confirm that it cannot slide, tip, or open unexpectedly, while also checking that it does not block access, ventilation, controls, or service points. If any check fails, remove it and reassess the setup.

With the car parked, close and open the container several times. Check the lid, lock, and hinges for smooth operation. Confirm that the box does not press against trim or interfere with the cubby’s normal use. Then check all nearby belts, controls, vents, and access panels. Do not test retention by driving aggressively or creating a sudden stop.

Use this checklist:

  • Does the box fit without force or pressure on surrounding parts?
  • Is the attachment point verified and approved for this use?
  • Is the container secure against movement during normal driving?
  • Can you open and close it without blocking controls or access?
  • Are vents, wiring access, seat-belt parts, and airbag areas clear?
  • Can a technician remove the setup for inspection or service?
  • Does the lock work, and does the lid stay shut?

There is no universal test weight or movement threshold for a 987 rear cubby. Do not add weight to “prove” an unknown fastener is strong enough. If the box shifts, rattles, or strains its mount, stop using it until you have a verified solution. Recheck the installation after removing and replacing the container, or after any service work nearby.

Next step: Keep the owner’s manual and the container’s fit or mounting information with your vehicle records.

Practical Scenarios and a Safe Decision

These examples are planning scenarios, not verified owner installations. They show how the same checks apply to different needs without claiming a particular 987 has a certain cubby size, anchor, or load limit. Use them to decide what to verify, not as instructions to copy a mount or fastener.

Scenario: small everyday items. You want to keep a few personal items together. Measure the cubby, compare those measurements with a small lockable container, and check that the box does not obstruct access. If no approved attachment is available, do not assume a loose box is safe for driving.

Scenario: a larger item for occasional trips. The item may fit only if the container presses against the cubby or blocks a panel. That is a poor fit, even if the lid closes. Choose a smaller item or another storage location that does not interfere with vehicle systems.

Scenario: a product advertised as a direct fit. Ask the seller to confirm the exact model year and body style, the attachment method, and any stated limits. Compare the product’s instructions with the owner’s manual and applicable workshop information. If the details do not match, pause rather than adapting the mount yourself.

Scenario: an unclear panel or fastener. You cannot tell whether a surface hides wiring or a restraint component. Do not drill, pry, or attach a bracket there. Have a qualified technician identify the area, or choose a setup that does not require access to it.

The right choice is not always the box with the most capacity. A smaller container that fits, stays secure, and leaves vehicle systems clear is more useful than a larger one that creates new risks.

Conclusion and FAQ

A safe rear-cubby setup begins with your exact 987, not a generic product listing. Check dimensions and nearby systems, choose a documented container and attachment, then verify fit and retention. If the attachment point is unclear, stop and seek qualified help. No container makes unattended valuables theft-proof, so avoid leaving high-value items in the car.

Can I use the rear cubby in every Porsche 987 for a lockbox?

Not without checking the specific car. Cubby dimensions, nearby equipment, and attachment points can vary by model year and body style. Measure your vehicle and review its documentation before selecting a box.

Is there a universal 987 rear-cubby size?

No universal, verified dimension applies to every configuration. Measure the opening, depth, and clearances on your own car, then compare them with the container’s full outside dimensions.

Can I drill into the cubby trim to secure a box?

Do not drill into trim or any surface unless the attachment point is positively identified and approved. A trim panel may conceal wiring or restraint parts. Ask a qualified technician if you cannot verify what is behind it.

Are factory fasteners strong enough to hold a lockbox?

There is no universal load rating for factory fasteners in this location. Use a fastener only if Porsche documentation or the product maker confirms it is approved for that use and configuration.

Will a lockable box prevent theft?

No. A lock may deter casual access, but it does not prevent someone from taking the box or entering the vehicle. Avoid leaving high-value items unattended.

Can the container cover a vent?

No. Keep existing vehicle vents clear. An ordinary storage container does not have a generic CFM requirement, but the car’s ventilation openings must remain unobstructed.

What if I cannot tell whether a panel hides wiring?

Do not drill, pry, or fasten into it. Check the applicable workshop documentation or ask a qualified Porsche technician to identify the area.

How do I know the box is secure enough?

Use a documented attachment that is approved for your car, then check that the container does not shift during normal use. Do not invent a load test or rely on an unknown trim piece as an anchor.

Should the box be removable for service?

Yes, the setup should allow access for inspection or service. Follow the container’s instructions and vehicle documentation, and remove it if it blocks a service area.

What should I do if the box rattles or moves?

Stop using that setup while driving. Remove it and review the fit and attachment method. Do not fix movement by drilling into an unverified surface or tightening an unknown fastener.

(This article was written by one of our staff writers, Robert Kensington. Visit our Meet the Team page.)

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *