Hide Craft Supplies in IKEA Furniture (Kallax Inserts)
Use compatible IKEA KALLAX inserts to hide ordinary craft supplies while keeping them sorted and easy to reach. Measure each cubby, check the exact insert’s fit, place heavier items low, and follow the unit’s assembly and anti-tip instructions. Keep hazardous products in suitable storage, and never cut or drill structural panels to make hidden compartments.
A craft room can look tidy right up until you need one pair of scissors. The irony is that adding storage can create more visual clutter if every supply stays on display. KALLAX inserts can conceal everyday materials, but a good setup starts with fit, safe storage, and a clear plan for what you reach for most.
I plan each cubby around a type of supply, rather than treating every square as a catchall. That small choice helps avoid the familiar cycle of hiding a mess, then emptying the whole unit to find one tool.
Plan the KALLAX Layout and Supply Categories
A useful KALLAX plan matches each insert to a clear supply category and the way you use it. Before shopping, identify the unit model, sort materials by size and weight, and set aside anything that needs special storage. The goal is hidden storage that stays practical, not a full cubby that is hard to use.
Sort craft supplies before choosing inserts
Start by grouping supplies into broad categories, such as paper and notebooks, fabric, yarn, tools, adhesives, and small accessories. Then note which groups need a drawer, which are fine behind a door, and which are easier to reach in an open bin. An insert hides contents; it does not make a poor category system easier to manage.
I use three questions to guide the layout:
- What do I use every week?
- What can be stored in a labeled box or drawer?
- Does any product need storage conditions stated on its label?
Keep hazardous or volatile products out of the general craft-supply plan until you have checked their labels. A closed insert is not a safety cabinet.
Choose inserts for the contents
A drawer insert can suit small tools and loose items that otherwise spread across a shelf. A door insert can hide larger, less-used supplies in their own containers. Open cubbies may be better for bulky materials you reach for often. Check IKEA’s current compatibility information for the exact insert and KALLAX model; similar-looking units or inserts are not proof of a match.
| Supply type | Possible insert choice | Planning check |
|---|---|---|
| Scissors, pens, small tools | Drawer insert | Measure item height and drawer depth |
| Paper, notebooks, flat kits | Door insert or open cubby | Check width and orientation |
| Yarn, fabric, bulky kits | Door insert or labeled container | Check how much space remains for access |
| Adhesives or specialty products | Only as allowed by the product label | Confirm storage conditions before placing in a closed insert |
Next step: Make a short map of your cubbies and write one supply category beside each planned insert.
Check Cubby Fit, Wall Clearance, and Access
Fit depends on the exact KALLAX model, insert, and assembled opening, so check measurements rather than relying on a product name alone. Measure the cubbies you plan to use, inspect the unit’s instructions, and confirm the furniture can sit in place and be anchored as directed before you buy or load inserts.
Measure the unit and each opening
A common KALLAX size is listed as about 77 × 147 × 39 cm, and a common cube opening is about 33 × 33 cm. These are nominal figures, not a guarantee for every size, generation, or market. Measure your assembled unit, especially if it is older or has been moved.
Record the opening width and height at more than one point if they appear uneven. Also check the usable depth. The unit’s nominal depth is 39 cm, but a baseboard, wall feature, or other obstruction may reduce the space available behind it. Compare your measurements with the exact insert’s fit information.
Check placement and operation
Before installing anything, confirm the unit sits level and each planned door or drawer can open fully. Check that the furniture is positioned so its anti-tip strap can reach a suitable wall fixing point. Allow enough room to reach the insert contents without blocking a walkway or another cabinet.
There is no general airflow or clearance rule for ordinary dry craft supplies stored in furniture. However, products such as solvents, aerosols, fuels, and some resin products may have specific storage requirements. Follow the label and applicable fire-code rules rather than assuming a closed insert is suitable.
Next step: Write down the model, opening measurements, insert model, depth, and wall-fixing plan before assembly.
Install Inserts, Organize, and Anchor the Unit
Install only inserts confirmed as compatible with your KALLAX model, and follow the current instructions for both the furniture and the insert. Keep the original structure intact, distribute the load as directed, and anchor the assembled unit using fixings suitable for the wall. Check operation before and after adding supplies.
Fit inserts without changing the structure
Assemble the KALLAX and inserts in the order their instructions specify. Do not cut, drill, or remove structural panels to create a secret compartment. Such changes can weaken the unit and affect safe loading. If an insert does not fit as intended, stop and recheck the model and measurements instead of forcing it into place.
Load supplies after the insert is installed and operating smoothly. Put heavier containers in lower cubbies and spread weight across the unit rather than concentrating it in one area. Do not assume a universal shelf or anchor load rating. Use the current KALLAX instructions for furniture limits and the fastener maker’s rating for the actual wall material.
Anchor the unit as instructed
Follow the KALLAX assembly instructions for anti-tip attachment. Select wall fixings based on the wall substrate and the fastener manufacturer’s guidance; a fixing suitable for one wall type may not suit another. If you are unsure what the wall is made of or how to choose a fixing, get qualified help rather than guessing.
The strap and fixing need to remain usable after the unit is in its final position. Do not skip anchoring because the furniture feels steady when empty. Once loaded, recheck the attachment and fasteners, and keep the stored weight within the limits stated in the unit’s instructions.
Next step: Test every drawer and door, verify that the unit remains stable, and confirm the anti-tip attachment is secure after loading.
Verify Stability, Fit, and Safe Storage
A finished setup should conceal supplies without making them difficult to find or creating a safety issue. Check insert movement, labeling, weight placement, and anchoring after the unit is loaded. Review storage labels for products with special requirements, and change the layout if an insert binds or a category becomes hard to reach.
Run a final check
Open and close each insert several times. Watch for rubbing, catching, or movement that suggests a fit or assembly problem. Confirm the unit sits level, the anti-tip strap remains attached as instructed, and heavier items are not concentrated high in the unit.
Keep labels facing outward where possible. A hidden drawer is useful only if you can remember what is inside it. Labeling can be simple: “paper,” “sewing tools,” or “painting.” For small supplies, use a container within the drawer so loose items do not become one mixed pile.
For any product with a warning label, check whether its storage instructions allow it to be kept in a closed furniture insert. Do not store volatile products in a way that traps vapors or near heat sources. If the label calls for specific conditions, follow those instructions and applicable fire-code requirements.
Next step: Recheck the unit after the first few days of use and whenever you change the insert layout or load.
KALLAX Craft Storage Examples
These planning examples show how the same unit can serve different craft routines without changing its structure. They are illustrative layouts, not measured installations or claims about a specific home. In each case, confirm the exact insert fit, product instructions, unit load limits, and anti-tip setup before use.
Example: Small tools and paper crafts
For frequent paper crafting, assign a drawer insert to small tools and accessories, and reserve a separate cubby for paper or notebooks. Keep the items used most often at a comfortable reach, with heavier paper packs low. Measure the paper and insert opening first; do not assume a pack will fit because it looks close.
Example: Sewing and fabric supplies
A door insert can conceal fabric stored in labeled containers, while a drawer can hold small sewing tools. Place heavier containers low and keep sharp tools contained so they are easy to retrieve without reaching into a loose pile. Store any product with special handling instructions according to its label.
Example: Shared family craft supplies
Give each person or activity a labeled drawer or container, rather than mixing all materials together. Keep adult-use products separate where needed, and check labels for storage requirements. This layout can make cleanup clearer, but it does not replace supervision or safe storage rules for hazardous items.
| Scenario | Simple cubby plan | Main check |
|---|---|---|
| Weekly paper projects | Drawers for tools; paper in a separate cubby | Measure paper and drawer space |
| Sewing supplies | Drawer for tools; door insert for fabric | Keep tools contained and weight low |
| Shared family use | One labeled container per activity | Separate products with special requirements |
Next step: Use these as starting points, then assign each cubby based on your own supplies and reach habits.
Conclusion and FAQ
KALLAX inserts can make craft supplies less visible without changing the furniture’s structure. The reliable approach is to verify model compatibility, measure the assembled openings, sort supplies by use, and follow the unit’s instructions for loading and anti-tip attachment. Keep products with special storage needs out of a general closed-insert plan.
Can IKEA KALLAX inserts hide craft supplies?
Yes. Compatible door and drawer inserts can conceal many ordinary craft supplies. Check the fit information for your exact KALLAX model and insert.
What size is a KALLAX cube opening?
A common opening is about 33 × 33 cm, but dimensions can vary. Measure your assembled unit before choosing an insert.
Is every KALLAX insert compatible with every KALLAX unit?
No. Use IKEA’s current compatibility details for the exact unit and insert. Do not rely on appearance or a similar product name.
Can I drill or cut a KALLAX panel for a hidden compartment?
Do not cut, drill, or remove structural panels to make a concealed compartment. Changes can weaken the unit and affect safe loading.
Do dry craft supplies need ventilation inside an insert?
There is no general airflow rule for ordinary dry craft supplies stored in furniture. Follow product labels for any material with specific storage needs.
Can I store paint, glue, or resin in a closed KALLAX insert?
Check each product label first. Some products may require specific storage conditions, so do not assume a closed insert is suitable.
How should I arrange heavy craft supplies?
Place heavier items low and distribute weight across the unit. Follow the load limits in the current KALLAX instructions.
Does a KALLAX unit need to be anchored?
Follow the unit’s assembly instructions for anti-tip attachment. Use a wall fixing suited to the wall material and the fastener maker’s guidance.
What should I do if an insert does not slide or close smoothly?
Stop and check the assembly, compatibility, and measurements. Do not force the insert into place or alter structural panels.
How deep is KALLAX?
A common unit has a nominal depth of 39 cm. Check the exact model and measure for baseboards or other wall obstructions.
(This article was written by one of our staff writers, Robert Kensington. Visit our Meet the Team page.)





