How To Hide Fuse Box In Hallway (5+ Ways Explained)

To conceal a fuse box in a hallway, options include using canvas art to cover it with a push-and-pull mechanism, using foam poster boards taped together, or employing a decorative screen for easy installation. Painting the fuse box to match the wall color, installing a cabinet, or using a bookshelf are additional effective methods to hide it. Always prioritize safety and seek professional guidance for installation if needed.

The hallway is the transition between one room and the next, a bridge that connects a home from one end to the other.

With this flow of movement, the last thing a homeowner needs is an eyesore like an exposed fuse box.

Fortunately, there are options for homeowners to hide the fuse box, making the hallway a more pleasant space.

DIYers can create a stylish cover that matches the decor of the home.

With a little bit of thought and some elbow grease, the fuse box can be converted into an aesthetically pleasing piece that is easy to access, but hides the unsightly face of the fuse box.

With the right materials and tools, the fuse box can be camouflaged and the hallway can be enjoyed without the distraction of an exposed piece of machinery.

How To Hide Fuse Box In Hallway (5+ Ways Explained)

Gather the Necessary Materials

To begin the project, an electrical box cover must be obtained to ensure the safety of the wiring. For the walls, drywall and drywall tape are necessary to complete the project. Lastly, the drywall tape will be used to seal the seams between the pieces of drywall.

Electrical Box Cover

Having gathered the necessary tools and supplies, the next step in the process of replacing a light switch is to collect the materials needed. An important element of this project is an electrical box cover, which will house the new switch and maintain a secure connection.

For a project like this, it’s best to choose an electrical box cover that is made of metal for durability and strength. Depending on the size of the switch, a single- or double-gang box cover should be selected. When measuring the box cover, it’s important to ensure that it fits the width and height of the switch, as well as the wall opening. Additionally, the box cover should have the appropriate knockouts for the number of wires and cables that will be used.

Finally, the box cover should be attached firmly to the drywall to keep the wires and cables secure and to ensure that the switch can be used safely. It’s important to use the appropriate screws for the wall material and to ensure that the cover is secured in the wall properly. With the cover attached, the switch can now be installed and the project can move forward.


Once the electrical box cover is installed, the next step is to prep the drywall. Before the drywall can be put in place, it needs to be properly cut to fit the space. With the help of a drywall saw, the drywall can be cut into the necessary sizes and shapes. After being cut, the drywall needs to be sanded down to ensure there are no sharp edges.

The drywall also needs to be taped along the joints and seams. A drywall tape is used to cover the joints and seams, creating a smooth, seamless surface. Drywall tape should be applied with a drywall knife and thin layer of sealing compound. This will help to prevent moisture from entering the drywall and prevent mold from forming.

Once the drywall has been cut, sanded, and taped, it can be applied to the wall. Drywall screws should be used to secure the drywall in place. These screws should be spaced equally throughout the wall and not placed too close to the edges. The drywall should be firmly attached to the wall, without gaps or warping. Once installed, the drywall can be finished with joint compound and sanded to create a smooth surface.

Drywall Tape

Now that we have gathered our electrical box cover and drywall, it’s time to grab our drywall tape. Drywall tape is an essential tool for creating a seamless finish when joining two pieces of drywall together. This tape is made of strong fibers and has a paper backing that creates a solid seal when joined to the drywall. It is important to use the tape in conjunction with a joint compound to ensure a smooth, finished look.

While choosing the right drywall tape, it is important to consider the size of the project. Drywall tape comes in various sizes, ranging from small strips to large rolls. As a general rule, it is best to select tape that is slightly longer than the area you are covering. This prevents the tape from being too tight when applied and ensures a seamless finish.

The drywall tape should be applied in a smooth, even motion. When applying the tape, make sure to press the paper backing firmly against the drywall. This creates a secure bond that helps to prevent cracking and improves the overall appearance of your project. Once the tape is in place, a joint compound can be applied to complete the look. The compound should be spread evenly over the tape and allowed to dry before sanding and painting. With a few simple steps, the drywall tape will help create a professional and polished look.

Remove the Fuse Box Cover

To gain access to the fuse box, the circuit breaker must first be switched off to avoid any potential electrical shock. Unscrewing the cover of the fuse box reveals the internal components, ready to be carefully removed from the frame. With the cover removed, the fuses can then be accessed for further inspection.

Turn Off the Circuit Breaker

Before beginning to remove the fuse box cover, it is absolutely essential to first turn off the circuit breaker. Doing so will prevent any potentially hazardous shocks from electricity, and will also ensure that no further damage is done to the fuse box or any of its components.

To begin, locate the circuit breaker box. This is typically located in the basement or garage of a home, and is often near the electrical meter or the power line entrance. It should be clearly labeled, making it easy to identify. Once it has been located, open the box and find the corresponding switch for the fuse box. Note that this switch may be labeled differently, depending on the type of circuit breaker box being used.

Once the circuit breaker switch has been located, use a screwdriver to turn off the switch. It is important to check that the switch has been completely turned off, and that the switch is still in the “off” position. If the switch is not in the “off” position, it is possible that the fuse box may not be completely disconnected from the power supply. This could be very dangerous, so make sure that the circuit breaker is completely turned off before proceeding.

Unscrew the Fuse Box Cover

Now that the circuit breaker has been turned off, it’s time to unscrew the fuse box cover. The cover is held in place by four to six screws, depending on the type of fuse box. Using a screwdriver, begin to carefully and slowly unscrew each screw until the cover can be easily removed. It is important to take caution during this step to ensure that none of the wires underneath the cover come undone. If the cover is stuck, it may be helpful to spray a lubricant on the screws to loosen them. Once the screws have been removed, the cover should be able to slide off the box.

Carefully Remove the Cover

Now that you have the necessary materials and have shut off the circuit breaker, it’s time to remove the fuse box cover. Doing this requires a bit of caution and care, as the cover is likely to be heavy and could cause serious injury if mishandled.

To remove the cover, use both hands to carefully lift it up from the fuse box. It might also be necessary to jiggle it slightly in order to free it from the box. As you remove the cover, be aware of any exposed wires or loose connections, and keep them clear of the area.

Once the cover is removed, you should be able to clearly see the fuses within the box. Carefully place the cover off to the side in a safe place, away from any potential debris or hazards. With the cover now removed, you’ll be able to proceed with the next steps of replacing the fuse.

Cut a Hole in the Drywall

Carefully mark out the area for the cut, ensuring a precise outline. Take a drywall saw and cut along the marked lines. Create a perfect fuse box cutout by carefully cutting away the marked area.

Mark the Area for the Cut

Having removed the fuse box cover, the next step is to mark the area for the cut. With careful precision, a pencil is used to trace the outline of the fuse box. This ensures that the size of the cutout will match the size of the box. Taking some extra time to double check the measurements and tracing the outline multiple times is essential for a successful cut.

To ensure the accuracy of the cut, a straight edge and a carpenter’s square are used to draw additional lines for reference. This will serve as a guide for the saw when it is used to cut through the drywall. For larger areas, it may be necessary to use a drywall saw to cut out the marked area.

Once the area has been marked, a utility knife is used to score along the lines of the outline. This process helps to create a cleaner cut and prevents the drywall from cracking or chipping when the saw is used. After the drywall has been scored, the saw can be used to cut along the lines. This will create a perfect cutout for the fuse box.

Cut the Hole in the Drywall

Having marked the area for the cut, it was time to proceed with the next step – cutting the hole in the drywall. Carefully measuring the distance from the edge of the drywall to the cutout, a pencil was used to mark the area to be cut.

Next, an electric drywall saw was used to cut the hole. The saw was carefully maneuvered around the perimeter of the marked area, slowly cutting the drywall. Great care was taken to ensure that the saw did not break the drywall beyond the marked area. The dust from the saw was carefully vacuumed up using a shop vac.

Finally, the hole was inspected to ensure that the cut was precise and that the edges were smooth. Any uneven or jagged edges were sanded down to ensure that the fuse box fit perfectly. Once the hole was ready, the fuse box was placed into the drywall cutout.

Create the Fuse Box Cutout

Having marked the area for the cut, and cut the hole in the drywall, the next step is to create the fuse box cutout. Taking a utility knife, carefully score the edges of the hole, creating a grove that can be removed. Utilize a saw or jigsaw to cut out the drywall, making sure to pay attention to the grove and cut along the edges. To ensure a snug fit, lightly sand the edges of the cutout with a fine-grit sandpaper.

Using a measuring tape, confirm that the cutout is the same size as the fuse box cover. If needed, use a chisel and hammer to make precise adjustments to the size of the cutout. Once the cutout is the correct size, set the fuse box cover in the hole, and secure with screws.

Make sure to doublecheck that the fuse box is securely in place before cutting the power to the area. Once the power is cut, it is safe to reinstall the fuse box cover. With the cover in place, the installation of a new fuse box is complete.

Install the Electrical Box

Using a drill, attach the electrical box firmly to the wall. Secure it with screws and check for any loose connections. Finally, cut an opening in the wall with a saw to fit the size of the electrical box.

Attach the Electrical Box to the Wall

Now that the hole has been cut in the wall, it’s time to attach the electrical box. To begin, you’ll need to locate the appropriate screws for the electrical box. Depending on the size of the box, you may need two to four screws. Once you have the screws, insert them into the four corners of the box. Then, hold the electrical box up to the wall and use the screwdriver to secure it in place. Be sure not to over-tighten the screws, as this can cause the wall to crack. Once the electrical box is secured to the wall, you can begin cutting the opening for the wires.

Secure the Electrical Box

Having cut a hole in the drywall, it’s time to secure the electrical box. Taking a drill, fit it with the appropriate bit for the job and use it to make two pilot holes—one at the top and another at the bottom—in each of the four corners of the electrical box.

Next, insert the appropriate length and type of fastener into each of the pilot holes, making sure they’re just the right depth. This is an important step to ensure that the electrical box is securely attached to the wall. Then, carefully and firmly tighten the screws until the box is firmly attached.

Lastly, ensure that the electrical box is flush with the wall. If necessary, use a shim behind the box to bring it flush with the wall. This will ensure that the box is properly secured and ready for the wiring to be put in place.

Cut Opening

Now that the electrical box was attached to the wall, it was time to cut an opening. This step could mean the difference between a secure box that is flush to the wall and one that stands out like a sore thumb. The tools needed for this step were simple – a pair of snips and an old-fashioned keyhole saw.

The snips were used to remove the excess drywall around the edges of the electrical box, cutting flush with the wall. Once the drywall was cut away, the keyhole saw was used to cut out a small hole in the center of the box.

The keyhole saw was maneuvered around the edges of the hole, slowly cutting through the drywall. The saw made a crunching sound as it cut, and the pieces of drywall fell away to the floor. Once the hole was cut, the electrical box was ready to be secured and wired.

Install the Drywall

The first step is to tape the drywall seams with a mesh tape, ensuring that the corners are securely sealed. Next, apply a coat of drywall compound to the seams to form a smooth, even surface. Finally, sand the drywall compound until it is smooth and even.

Tape the Drywall Seams

Having installed the electrical box securely, it’s now time to move onto the next step in the project: installing the drywall. The first step in this process is to tape the drywall seams.

Starting at one end of the room, gently press the construction grade adhesive drywall tape into each seam, ensuring that the tape is applied firmly and evenly. The tape should be cut off at the corner, and any excess should be removed with a razor blade. Allow the tape to overlap slightly at the corners and edges, and avoid stretching it, as this can lead to wrinkles and bubbles.

Once the entire room has been taped, it’s time to move on to the next step – applying drywall compound. Before starting, check that the drywall seams are free from any dust or debris. Use a putty knife to spread a thin layer of compound over the tape, taking care to not add too much pressure as this can push the tape out of place. Work from the center of the seam outwards, and use a damp cloth to remove any excess compound. Once finished, you should have a neat and smooth line of drywall tape.

Overall, taping the drywall seams is a relatively straightforward process, but it’s important to take your time and do it correctly to ensure the best possible results. With the right approach, you can have your drywall seams taped in no time.

Put Drywall Compound on the Seams

Having installed the electrical box, it’s time to move on to the drywall. Taking the drywall sheets, the first step is to tape the drywall seams. This will ensure a solid surface for the next step, which is to put drywall compound on the seams.

Using a putty knife to spread the compound, it’s important to make sure each seam is evenly covered. Any lumps should be smoothed out, and the compound should be spread outward from the seam. The compound should be applied in a thin, even layer, so it doesn’t take too long to dry.

Once the compound has been spread, it should be left to dry before sanding. The compound should be slightly raised above the surface of the drywall when dry, as this will ensure that the surface is level after sanding. The sanding should be done with a fine-grit sandpaper, and with a light hand. Too much pressure can cause the compound to come off, leaving behind an uneven surface. Going over the same area multiple times will help to create a smooth, even surface.

Sand the Compound Smooth

Now that the drywall is securely in place, it’s time to sand the compound smooth. Sanding drywall compound is a critical step in the drywall installation process, as it gives the surface a smooth finish and also helps to conceal the seams.

Sanding drywall compound requires more than just a regular old sandpaper. The best way to get a smooth finish is to use a sanding sponge, which is specifically designed for this type of job. Sanding sponges are available in varying grades to suit different tasks, and it’s important to choose the right one for the job. For this task, it’s best to select a medium-grade sanding sponge.

Once you have the right sanding sponge, you can begin to sand the drywall compound. It’s important to take your time and go slowly, as the movement of the sanding sponge can cause the compound to become uneven if you rush it. Start by sanding in small sections, using light pressure and making two or three passes. Work in circles and be sure to sand all of the seams to get the best results.

Once you’ve finished sanding, it’s time to step back and admire your work. With a little bit of patience and the right tools, you can make the drywall look like it was professionally installed. Sanding the compound smooth is a crucial step in making sure the drywall looks seamless and beautiful, so take your time and enjoy the results.

Paint the Wall

The first step in painting the wall is to choose the right paint color. A few swatches of paint can help narrow down the right hue to bring life to the room. After the color is selected, the next step is to apply the paint to the wall. With the help of a brush and roller, the paint can be smoothly spread across the wall, leaving a beautiful finish. Finally, once the paint is dry, the wall is ready to be admired.

Choose the Right Paint Color

Now that the wall is up, it’s time to select the perfect color to make the room come to life. There are a few key considerations when choosing the right paint color.

First, consider the purpose of the room. Is it a living room, a bedroom, or a kitchen? Different rooms have different atmospheres, so the right color should reflect the purpose of the room. For instance, a living room should have a warm, inviting color, while a bedroom should have a soothing, calming color.

Second, consider the lighting in the room. Natural lighting can make a room feel cozy and bright, while artificial lighting can create a more dramatic effect. Colors look different under different lighting conditions, so be sure to test the color in the room to make sure it looks the way you want it to.

Finally, think about the mood you want to create. Are you looking for a bright, cheerful atmosphere? Or a more subdued, relaxed atmosphere? Choose the color that best matches the ambiance you’re going for.

By considering the purpose, lighting, and desired mood of the room, you can select the perfect paint color to make the room come alive.

Apply the Paint to the Wall

Now that you have the drywall installed and ready to go, it’s time to start thinking about paint. It’s important to choose the right color for your space, but once you have that decided, it’s time to start painting! Applying the paint to the wall is an important step to getting a smooth and even look on the wall.

Start by taking a roller and dip it into the paint tray. Swirl the roller around to get an even coat of paint onto the roller. Make sure to remove any excess paint from the roller. A good trick is to roll the roller onto a piece of cardboard before rolling onto the wall. This will help to remove any excess paint, resulting in a more even coat on the wall.

Once the roller is ready, start at the top of the wall and roll the paint in an “M” or “W” pattern to apply the paint evenly. This technique will help to ensure that there are no streaks or blotches on the wall. Make sure to roll slowly and carefully to avoid any roller marks. When you get to the edges of the wall, use a brush to get a neat and even edge. Finally, take a clean, lint-free rag and smooth out any roller marks or brush strokes. With the paint applied, you can now get ready for the final step in your wall painting project—the painting itself!

Painting the Wall

Now that the drywall is installed, it’s time to get painting! Painting is a fun and creative way to transform a room, but before you get started, you’ll need to pick the right paint color. Once that’s done, it’s time to get to work.

Painting a wall is a process that requires patience and attention to detail. To get the best results, you’ll need to start by preparing the surface. Begin by sanding any imperfections and wiping the wall down with a damp cloth to remove any dust or debris. Once the surface is prepared, you’ll need to apply a primer to the wall to ensure the paint adheres properly.

When you’re ready to start painting, use a roller or a brush to apply the paint to the wall. Work in small sections, starting with the edges first and then working your way in towards the middle. Paint the wall in even strokes, and make sure to overlap each stroke slightly to achieve a smooth finish. After the first coat is dry, add a second coat if necessary. Once you’re finished painting, you’ll have a freshly painted wall that looks like it was done by a professional.

Replace the Fuse Box Cover

Carefully securing the cover to the box, double-checking to make sure the power is connected correctly, and ensuring the measurements are correct are all essential steps to replacing the fuse box cover. Taking extra time to ensure each step is done properly will help the project go smoothly and result in a successful replacement.

Secure the Cover to the Box

Now that the wall has been painted, it’s time to move onto the next step: replacing the fuse box cover. It’s important to make sure the cover is secured to the box correctly and that the power is tested before finalizing the job.

Before affixing the cover to the box, it’s necessary to first make sure all the screws are the correct size and fit for the cover. Once all the screws are in place, the cover can be attached to the box. To ensure a tight and secure fit, use a screwdriver to fasten the screws and make sure they are screwed in firmly.

Next, test the power to the box using a voltage detector. This will help to verify that the box is properly wired and that the electricity is flowing correctly. Make sure to turn off the main switch before doing this. After ensuring that the power is running correctly, the fuse box cover can be fully secured to the box.

With the cover securely attached to the box, the job is almost done. The final step is to measure the box once the cover is in place. This will ensure that the cover is properly fitted to the box and that it will not move or become loose over time. With all the steps completed, the fuse box is now ready for use.

Test the Power to the Box

Having completed the task of painting the wall, the next step was to replace the fuse box cover. To ensure a secure fit, it was important to make sure it was properly fastened to the box. To do this, a drill and screws were used to attach the cover to the box.

Once the cover was securely fastened, it was time to test the power to the box. First, the power was switched off and the wires were inspected to make sure they were connected properly. Then, the main switch was flipped back on and the circuit breaker was tested to ensure it was working. Finally, an ohmmeter was used to check the current and voltage, ensuring the fuse box was functioning properly and the electrical system was safe.

The measurements were checked one last time to make sure the cover was fitted correctly. Once it was confirmed the fuse box cover was in place, the job was complete and the wall was now ready for use.


After the wall was painted to a perfect finish, it was time to secure the fuse box cover back into place. Carefully lifting the cover, a few measurements were taken to ensure the box would fit snugly. The dimensions were carefully noted and a ruler was used to verify the correct size. Measuring the length, width, and depth of the box, the measurements were double-checked to make sure the cover would fit securely. A few adjustments were made until the measurements were just right, and finally, the cover was ready to be fastened back into place.

Enjoy the Results!

The newly renovated hallways offer a stunning transformation, with modern décor and furniture to admire. With the fresh look, one can enjoy the peace and privacy of their own hallway, away from the hustle and bustle of the dorm. Finally, gather up friends and make some lasting memories in the newly refreshed space.

Take in the New Look

Having replaced the tired, worn fuse box cover, you can now take in the fresh, new look of your hallway. The elegant white paneling stands out against the deep blue paint, highlighting the intricate details of the doorway. A luxurious, white, plush carpet lines the floor, creating a soft, inviting atmosphere. Small, recessed lights dot the ceiling, casting a gentle, warm glow about the hallway. The effect of the perfectly-coordinated colors and textures is calming and inviting, inviting you to linger in the hallway.

The new look of your hallway also offers a pleasant sense of privacy. Now that the old, broken fuse box cover has been replaced, you can feel secure knowing that your hallway is now protected from any curious eyes. The peace and quiet of the hallway allows you to truly appreciate the beauty of your home, free from any outside distractions.

From the dim, cozy lighting to the inviting colors, textures, and materials, you can take in the new look of your hallway and be filled with a sense of pride. Knowing that you have taken the time to update your home with a new fuse box cover, you can feel confident that your hallway will look inviting and beautiful for years to come.

Enjoy the Privacy of Your Hallway

Having replaced your fuse box cover, you can now take a moment to step back and appreciate the new look of your hallway. Now you can enjoy the privacy of your hall, knowing that your fuse box is safely tucked away and no longer an eyesore. There is nothing quite like the feeling of having a space that is yours and yours alone.

The hallway can be a place for you to enjoy your own company or for you to share with those who mean the most to you. If you have children, this is a great place to make memories together, playing games, telling stories, or just simply talking about your day. You can use the hallway to set the tone of your home, be it calm and cozy or vibrant and energetic.

No matter what you choose to do, the privacy of your hallway is yours to enjoy. You can make it a place to relax and unwind, or a place to laugh, dance, or sing. There are no rules here, so use your imagination and make it a space that reflects your own personal style.

Making Memories

Your hard work is done and now it is time to enjoy the results! After taking in the new look of the hallway, you can now make memories in it. Sunbeams sparkle and dance around the room, creating an inviting atmosphere. The walls come alive with vibrant hues, while the newly installed light fixtures glisten and glimmer.

The hallway is now a place of peace and solace, a place to take in the beauty of the world around you. Here, you can relax and enjoy the company of loved ones. Whether it be sharing stories, playing games, or just sitting and taking in the moment, the hallway is the perfect spot for making memories.

You can also use the hallway to create special moments with family and friends. Invite them over to take in the new atmosphere of the hallway and let them know how much it means to you. From time to time, you can make new memories here and look back fondly on the hard work you put into making it a space worth cherishing.


Hiding a fuse box in a hallway can be a great way to add a neat and tidy aesthetic to any space. The process is simple and straightforward, and with the right materials and approach, you can have a beautiful and unobtrusive display in no time. With a little bit of patience and creativity, your hallway can be transformed into a space that is both functional and aesthetically pleasing. So don’t wait any longer, take the time to hide your fuse box and enjoy the results!

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *