How To Hide Pipes Behind Pedestal Sink (5+ Ways Explained)
To conceal pipes behind a pedestal sink, options include using a skirted sink with fabric or wooden panels, employing a decorative screen for both style and functionality, installing a custom cabinet that hides pipes while adding storage space, opting for wall-mounted storage like shelves or a cabinet, or using a plumbing cover that attaches to the wall for a finished look. Professional consultation is advised for structural and safety considerations.
Installing a pedestal sink is a great way to add a beautiful and elegant touch to any bathroom.
The classic design is timeless and can bring a touch of sophistication to a room.
However, one issue that can arise is what to do with the unsightly pipes that can be seen once the sink is installed.
The good news is that there are some easy and affordable steps that can be taken to hide the pipes behind the pedestal sink.
By utilizing some creative problem-solving and some basic tools, it is possible to hide the pipes from view.
This will give the bathroom a more polished and finished look.
With the right materials, steps, and instructions, you can make your bathroom look like it was professionally designed.
Prepare the Area
First, the technician will measure and mark the desired locations for the new pipes. Next, any existing fixtures must carefully be removed and disposed of. Finally, the technician will prepare the area by hiding the pipes to ensure an aesthetically pleasing outcome.
Measure and Mark the Pipe Locations
Now that the tools and supplies have been gathered, it is time to start the process of preparing the area. The first step in the process is to measure and mark the pipe locations. Using a tape measure and a level, the exact locations of the pipes should be marked on the wall. It is important to make sure the marks are at the exact measurements as even a small mistake can mean the difference between a successful installation and a complete disaster.
Making sure to measure twice and mark once, the exact locations of the pipes should be marked with a pencil or marker along the wall. Taking the time to ensure the measurements are exact will pay off in the long run and result in a secure installation. Utilizing the level will also help in making sure the markings are accurate and level. Once the marks have been made, the next step is to remove existing fixtures.
Remove Existing Fixtures
Having measured and marked the pipe locations, the next step is to remove any existing fixtures that get in the way of the new pipes. This can include anything from existing taps to showers, sinks, and even bathtubs. Depending on the specific space, the contractor may need to use a variety of tools, such as a wrench, socket, or even a reciprocating saw.
It is important to be careful and mindful when removing fixtures. This is because some fixtures, such as a bathtub, can be extremely heavy and difficult to move. In order to stay safe, the contractor should ensure that they have appropriate safety gear and that they are working with at least one other person.
When it comes to removing fixtures, it is important to be precise and accurate. This means ensuring that the existing fixtures are completely removed and that there is no damage to the surrounding area. Any damage can lead to further complications, so it is important to take the time to do the job correctly. With a bit of care and attention, the contractor can safely and carefully remove existing fixtures without any issues.
Prepare the Pipe Hides
Next, it’s time to prepare the pipe hides. Before you install a new pipe, you’ll need to make sure the area is ready for the new fixture. Clean the area to get rid of any dirt or debris. Once the area is clean, use a level to mark the area where the pipe will be placed. This will help ensure the pipe is installed in the right spot. Use a utility knife or router to cut a hole in the area marked. This will create the space to install the new pipe. Make sure to wear safety goggles and gloves when cutting the pipe hole. Once the hole is cut, use a vacuum to clean up any dust or debris in the area. Now the area is ready for the new pipe installation.
Attach the Pipe Hides
Carefully connecting the pipe hides to the pedestal sink allows for a secure, firm attachment that won’t wobble or become loose. After connecting the pipe hides, they must be securely attached to the wall so that no leaks occur. Finally, install the P-Trap to complete the attachment of the pipe hides.
Connect the Pipe Hides to the Pedestal Sink
Moving on from the necessary preparation of the area, it is now time to connect the pipe hides to the pedestal sink. To do this, begin by attaching the slip nut onto the valve. This slip nut is a threaded metal piece that will secure the pipe hide to the valve. Next, carefully slide the pipe hide onto the valve, making sure the threads are lined up. Tighten the slip nut onto the pipe hide with a wrench, using a circular motion until the pipe hide is firmly attached to the valve. Finally, make sure all connections are secure and no water is leaking from the pipe hide. With the pipe hide now securely connected to the pedestal sink, the next step is to secure the pipe hide to the wall.
Secure the Pipe Hides to the Wall
Now that the pipe hides have been connected to the pedestal sink, it’s time to secure them to the wall. Begin by measuring the distance from the floor to the top of the pipe hides. This will help you determine the height for the wall brackets. Once you have the measurements, mark the wall with a pencil. Make sure the marks are level and evenly spaced.
Next, attach the wall brackets to the wall using a electric drill and the appropriate screws. Make sure the brackets are secure and level. You may need to use a level to ensure the brackets are straight.
Finally, attach the pipe hides to the wall brackets. Secure the pipe hides by tightening the screws on the brackets. Make sure the pipe hides are secure and not loose. With the pipe hides firmly attached to the wall, you can now move on to installing the P-trap.
Install the P-Trap
Now it’s time to finish off the pedestal sink installation process by installing the P-Trap. This device is essential for the proper functioning of the sink, so it is important to take the time to do it correctly.
To start, take the P-Trap and screw the two nuts onto the bottom of the trap. Make sure the nuts are tightened securely to the trap, then attach the trap to the drain pipe on the sink. Secure the P-Trap to the wall with a strap, and adjust it so that the trap is level with the sink.
Next, connect the flexible drain pipe to the P-Trap. Tighten the connection with the two nuts that come with the trap, and make sure the pipe is connected securely to the P-Trap. Finally, turn the water on and verify that the P-Trap is installed correctly by running the sink sink and checking for any leaks.
With the P-Trap connected to the drain pipe, the pedestal sink is now ready to be used. The installation process for the pedestal sink is now complete, and the sink can be used with confidence.
Apply Putty to the Pipe Hides
In preparation for applying putty to the pipe hides, the first step is to prepare the putty. Once the putty is ready, it should be applied evenly to the pipe hides. Finally, the putty should be left to dry before being used.
Prepare the Putty
Now that the pipe hides are securely attached, it’s time to prepare the putty. To begin, gather the necessary materials: putty, a putty knife, and a damp cloth.
The putty should come in a pliable, easy-to-work-with form. If it is too hard, knead it between your hands until it becomes soft and malleable. Once the putty is warm and pliable, use the putty knife to cut off the desired portion. Make sure to cut it in a way that will make it easier to work with.
Once the desired portion of putty has been cut off, place it on a flat, clean surface. Knead the putty until it becomes a uniform color and texture. If the putty is still too hard, add a few drops of warm water and knead it until it reaches the desired consistency. Make sure the putty is soft enough to easily spread around the pipe hides. Once the putty is ready, it’s time to apply it to the pipe hides.
Apply the Putty to the Pipe Hides
Now that the pipe hides have been firmly attached, it is time to apply putty to seal them in place. Using a putty knife, scoop a generous amount of putty onto the blade. Spread the putty evenly over the the edges of the pipe hides, making sure to apply enough pressure to ensure that the putty fills all of the gaps. A smooth, even layer should be visible once the putty has been applied. If additional putty is needed in spots, spread it onto the putty knife and continue applying it.
Once all of the edges of the pipe hides have been filled with putty, allow the putty to dry. In most cases, the putty will take 24-48 hours to completely dry. Check the putty periodically to make sure it is drying properly. If it appears to be hardening too quickly, sprinkle a bit of water on the putty and allow it to dry again. This will help to ensure that the putty is properly sealed in place and the edges of the pipe hides are completely protected.
Allow the Putty to Dry
Having applied the putty to the pipe hides, the next step is to allow the putty to dry. As the putty dries, an incredibly satisfying transformation takes place. This transformation begins as the putty starts to harden, eventually transforming into a sturdy, durable surface. While it dries, the putty’s color changes from a pale white to a deep brown, giving the pipe hides a classic, attractive look. This transformation is an essential step in the process, as it helps ensure the durability of the pipe hides.
The drying process for the putty can take anywhere from 8 to 24 hours, depending on the temperature and humidity of the environment. It’s important to allow the putty to dry completely before moving on to the next step. To ensure this, it’s best to let the putty dry for at least 24 hours. During this time, it’s crucial to keep the area dry and free of any debris which could interfere with the drying process. In addition, it’s important to keep the area well-ventilated so that the putty can dry completely and evenly.
Once the putty has had ample time to dry, it’s time to move on to the next step in the process. It’s important to ensure that the putty has dried completely and evenly before proceeding. Doing so will help ensure the durability of the pipe hides and give them a classic, attractive look.
Paint the Pipe Hides
Mixing the paint with precision ensures a uniform finish across the entire pipe hides; the paint is then applied, carefully and evenly, to the surface, taking care to cover every corner. Once the paint is dry, it creates a beautiful, glossy finish that will last.
Mix the Paint
Once the pipe hides have been prepared, it is time to mix the paint. Rather than using factory-made paints, a skilled craftsman will mix their own colors, using powdered pigments and a base of either oil or acrylic. The process of mixing the paint requires patience and precision, as the color and texture of the paint must be perfected before it can be applied to the pipe hides.
The first step is to measure out a precise amount of powdered pigment. Depending on the desired hue, the craftsman may use a single pigment, or a mixture of two or more. Once the pigment has been added to a container, the craftsman will slowly add a base of either oil or acrylic, stirring the mixture with a palette knife until the color is consistent throughout.
The craftsman will then work on the texture of the paint, adding more pigment or more base until the desired texture is achieved. This texture is extremely important, as too thick of a paint can clog the brush fibers, while too thin of a paint can leave lines on the finished product. After the texture has been perfected, the paint is ready to be applied to the pipe hides.
Apply the Paint to the Pipe Hides
A splash of color will bring the pipe hides to life. The process of applying the paint to the pipe hides is an exciting step that can help transform the look of the project.
The paint must be applied with a steady hand, ensuring that each stroke of the brush is even and consistent. Starting from the middle of the pipe hides, the brush should be moved in a downward motion, creating a smooth finish. With each brush stroke, the paint should be applied in thin layers, allowing time for the paint to dry before applying additional coats.
Once the pipe hides are covered with paint, the entire surface should be inspected for any unevenness or missed spots. If any areas need additional coverage, a second coat of paint can be applied. After the paint has been applied and inspected, it must be allowed to dry completely before moving on to the final step of the project.
Allow the Paint to Dry
Following the application of the paint to the pipe hides, the next step is to allow the paint to dry. This process requires patience and a steady eye to ensure that the paint has fully adhered to the hides and is completely dry. As the paint dries, it will begin to form a hard, protective shell around the pipe hides, providing a long-lasting finish.
The paint should be allowed to dry for the amount of time indicated in the manufacturer’s instructions, as different paints will require different drying times. To test the paint to see if it is finished drying, a person can lightly press a finger to the paint to check for tackiness. If the paint is still tacky, it is not fully dry. Otherwise, the paint can be considered dry and ready for use.
After the paint has dried, the pipe hides will have a glossy, finished look. They will be protected from the elements and any minor wear and tear that the pipe hides may be exposed to. The paint should remain intact for many years to come, ensuring that the pipe hides look and perform their best.
Connect the Pipes and Fittings
After gathering all the necessary supplies, the first step is to connect the P-Trap to the pedestal sink. Carefully attach the P-Trap to the sink’s tailpiece, ensuring a tight connection. Next, connect the pipes to the fittings, taking caution to align them correctly. Finally, perform a thorough test of the setup for any potential leaks before use.
Connect the P-Trap to the Pedestal Sink
At last, it’s time to connect the P-Trap to the pedestal sink. Securing this part properly is critical to ensure the sink is securely installed and the plumbing is leak-free. With the right tools and a little patience, the job can be done quickly and efficiently.
Begin by attaching the sink to the pedestal using the mounting brackets. Once the sink is secured in place, install the P-Trap between the sink tailpiece and the wall drain pipe. Use a wrench to tighten the slip nuts that connect the P-Trap to the drainpipe and the tailpiece. To ensure a good seal, use a plumber’s putty to fill the gap between the sink tailpiece and the P-Trap.
Next, attach the flexible drain line to the P-Trap. When the sink is in place, the flexible drain line should be connected to the tailpiece of the sink and run down the wall drainpipe. Make sure the drain line is properly connected to the P-Trap and is securely tightened. Finally, use a wrench to connect the drain line to the wall pipe.
Now that the P-Trap is connected to the pedestal sink and the drain line is securely in place, it’s time to test for leaks. Run some water down the sink to make sure there are no leaks. If there are any, make sure to tighten the connections or use extra plumber’s putty to seal the gaps. With a secure connection, the sink should be ready to use and you can move on to the next stage of your project.
Connect the Pipes to the Fittings
Now that you have painted the pipe hides, it’s time to connect the pipes and fittings. To begin, locate the appropriate fittings for connecting the piping. These fittings will be used to join the pipes together and secure them in place. Make sure to use the correct type of fittings for the pipes you are connecting, as using the wrong type of fitting may cause leaking.
Once the correct fittings are selected, start by attaching the pipes to the fittings. To do this, first apply a generous amount of pipe joint compound to the threads of the fittings. The pipe joint compound will help to ensure a tight, watertight seal. With the pipe joint compound in place, screw the fitting onto the pipe until it is firmly attached. Once the fitting is firmly attached, use a pipe wrench to tighten the connection. It is important to not over-tighten the connection as this may cause damage to the pipes or fittings.
Finally, attach the last fitting and test the connection for leaks. To do this, turn on the water and look for any signs of leaking. If a leak is found, tighten the fitting until the leak stops. If the leak persists, add more pipe joint compound or replace the fitting. Once all the connections are secure and leak free, your pipes and fittings are ready to be installed.
Test for Leaks
Now that all of the pipes have been connected to the fittings, the next step is to test for leaks. To begin, you should inspect each connection visually and ensure that each pipe and fitting is securely fastened. You should also check for any irregularities, such as corrosion, in the pipes or fittings. If any are found, they should be repaired or replaced before continuing.
Next, it’s a good idea to add a small amount of pipe joint compound around each joint to ensure a watertight seal. This compound is designed to fill any small gaps between the pipe and fitting, creating a secure fit. Once the joint compound has been applied, the connection can be tested.
Finally, you’ll want to fill the sink with water and check for any leaks around the connections. If any are found, you should tighten the connections until the leak stops. Once all of the connections have been sealed and tested, your plumbing installation is complete.
Install the Pedestal Sink
To secure the pedestal sink in place, use heavy-duty anchors to firmly attach it to the wall. Next, connect the water supply lines to the sink and turn on the water supply to test for any potential leaks. Finally, check all connections and fittings to ensure there are no leaks.
Secure the Pedestal Sink to the Wall
With the pipes and fittings connected, the next step in installing the pedestal sink is to secure it to the wall. It is important to ensure the sink is properly secured in order to avoid a situation in which it can topple over and break. To begin, it is important to choose the proper anchor for the wall. This anchor will be attached to the wall and then the pedestal sink will be attached to the anchor.
Once the appropriate anchor is selected, the next step is to mark the position of the anchor on the wall. To do this, the sink should be placed in its correct position and then the anchor should be marked on the wall based on the sink’s location. If the wall is concrete, a hammer drill bit should be used to drill a hole into the wall to embed the anchor. If the wall is drywall, a drill bit should be used to create a hole in the drywall for the anchor.
Finally, the anchor should be inserted into the wall and the sink should be attached to the anchor. This may require special tools, such as a ratchet wrench, and the directions included with the anchor should be followed. Once the sink is attached to the anchor, it should be tested for stability to make sure it is secure.
Connect the Water Supply Lines
The next step to installing the pedestal sink is to connect the water supply lines. To begin, the primary valve should be turned off and the wall-mounted shutoff valves should be turned to the “off” position. The flexible supply lines and the mounting hardware should then be arranged near the pieces of the sink.
The flexible supply lines should be connected to the shutoff valves, which should then be connected to the sink base. The nuts and washers should then be attached to the valves and tightened securely. Care should be taken to ensure that the valves are facing outwards and that the water lines are securely fastened.
Once the water lines are connected, the sink should be attached to the wall with the mounting hardware. The mounting hardware should be placed in the appropriate grooves on the sink pedestal and adjusted accordingly. The sink should then be checked to ensure it is straight and secure. Finally, the supply lines should be tested for leaks and the sink should be wiped clean of any dust or debris.
Test for Leaks
Finally, it is time to test for any potential leaks. To do so, turn the valves on the water supply lines to the “on” position and check the connections for any water dripping. If all is well, turn on the faucet and check the pressure of the water. The water should flow smoothly and without any issues. If any leaks are detected, turn off the valves and check the connections once more. Tighten any loose connections and check the seals to ensure they are secured. Once all connections are secure, turn the valves back on and recheck for leaks. If all is well, the pedestal sink is now ready to be used.
Apply Caulk Around the Pedestal Sink
Before beginning the caulking process, all materials should be gathered and prepared. The caulk should be cut to the appropriate length and loaded into an applicator gun. Next, the caulk can be applied directly to the perimeter of the pedestal sink. Once the caulk is in place, it should be allowed to dry for the recommended amount of time before using the sink.
Prepare the Caulk
Now that you have installed the pedestal sink, you are ready to prepare the caulk. Preparing the caulk for application is an important step to ensure a successful job.
Start by gathering the supplies needed for the task. The supplies you need include a tube of caulk, a tube gun, a caulk smoother, and a damp cloth. To begin, cut the tip off the tube of caulk at a 45-degree angle. Insert the tube into the gun and make sure it is positioned securely. Squeeze the trigger of the gun to release a thin bead of caulk onto a piece of cardboard.
Test the flow of the caulk by adjusting the pressure on the trigger. Aim for a consistent flow that will result in a thin bead of caulk. This will make it easier to apply and smoother. Once you are satisfied with the flow of the caulk, you are ready to begin the application process.
Apply the Caulk to the Pedestal Sink
Now that the pedestal sink is securely installed, the next step is to apply caulk around it. With a steady hand and careful eye, a thin bead of caulk can be applied around the sink to create a waterproof seal.
Using a caulk gun, the bead of caulk should be applied around the sink in a continuous, even stream. Be sure the caulk is applied between the wall and sink, around the base, and along all the edges. After the caulk has been applied, it must be smoothed out with a wet finger to ensure it is even and creates a tight seal.
The final step is to allow the caulk to dry. The caulk will take about 24 hours to dry, but it is best to leave it for at least 48 hours before using the sink. This will ensure the caulk has had ample time to create a secure seal and prevent water from seeping in.
Allow the Caulk to Dry
With the caulk applied to the pedestal sink, the next step is to allow it to dry. As the caulk dries, it will become firm and create a strong seal that will last for years.
The drying process may take several hours, depending on the type of caulk used and the temperature of the room. To ensure that the caulk is completely dry, it is best to wait 24 hours before using the sink. During this waiting period, it is important that the sink area remains undisturbed, as any movement or moisture may disrupt the drying process.
It is important to periodically check the caulk for signs of dryness and firmness. Once the caulk is completely dry and firm, it is ready for use. With the caulk dry and firmly in place, the pedestal sink is now secure and will stand strong for many years to come.
Clean Up and Enjoy
The once cluttered and chaotic area is now clear and serene. The tools and materials that created the chaos have been carefully stowed away. With the area now clean, the new pedestal sink stands proudly, an impressive addition to the room.
Clean the Area
Now that the caulk has been applied, it is time to clean the area. First, take a damp cloth and wipe away any excess caulk from the pedestal sink. This will help ensure that the sink has a nice, even finish that is free from any bumps or lumps. Then, take a dry cloth and buff the area where the caulk was applied. This will help to further ensure a smooth, even finish. Finally, take a vacuum and clean up any small pieces of debris and dust that may have been left behind while the caulk was being applied. This will help to keep the area clean and free from any dirt or dust that could cause damage.
Put Away Tools and Materials
Having applied the caulk around the pedestal sink, it was time to put away the tools and materials. The caulking gun was carefully placed back in the toolbox, along with the tubes of caulk. Working with a rag, the countertop was wiped down to remove any excess caulk that may have spilled. The rag was then stored away in the bottom drawer of the cabinet, ensuring that it was out of sight and out of the way.
The trowel and putty knife were placed in the top drawers of the cabinet, resting against the soft foam so that they do not scratch the surface when they are not in use. The paintbrush was placed back in the can, ensuring that the bristles were not damaged in the process. All the other materials were gathered up and placed into a bucket, ready to be taken outside and disposed of.
The area was now completely cleaned up and ready to enjoy the new pedestal sink. The tools and materials were all tucked away, out of sight and out of the way, and the countertop was free from any excess caulk. All that was left to do was sit back and admire the new pedestal sink.
Enjoy Your New Pedestal Sink!
Having completed the task of applying caulk around the pedestal sink, the next step is to enjoy the new look! Taking a step back and admiring the newly installed pedestal sink is one of the most gratifying moments of any home improvement project. The elegant curves of the pedestal sink create a classic look and the newly applied caulk gives it a neat and polished finish. The white porcelain glistens against the white wall, creating a timeless look that could fit in any home.
The pedestal sink is a great way to add character and style to a bathroom. It also adds value to the home and can be an attractive feature for potential buyers. Now that the sink is installed, it is time to sit back and enjoy the beauty of the new pedestal sink with its perfect fit and finished look.
The time and effort that was put into this project is now visible in the finished project. There is a feeling of accomplishment that comes with completing a task and the pedestal sink is now ready to use. Enjoy the new pedestal sink and all the compliments that it will receive.
Conclusion
Once all the steps have been completed, you can enjoy the view of your newly installed pedestal sink. The pipes are now hidden behind the sink, giving the bathroom a neat and tidy appearance. The caulk around the sink provides a tight seal to ensure the sink stays firmly in place and will last for years to come. You can now admire the beauty of your new pedestal sink, knowing that it is safely installed and the pipes are hidden away.
