Hide TV Cables on Brick Fireplace (Mortar Line Raceway)
To conceal TV signal cables on a brick fireplace, first confirm what the wall is: brick veneer, structural masonry, or part of a chimney or firebox. A mortar joint is not automatically a safe channel. Use a suitable surface raceway where possible, keep power cords out of walls, and have any proposed masonry cutting reviewed by qualified professionals.
Layering is the key to a clean, safe result: the brick, any hidden wall layers, the fireplace assembly, and the cable route all affect what you can do. A neat line along a mortar joint may look simple, but cutting into that joint is very different from attaching a raceway over it. I start by identifying the assembly, then choose the least invasive route.
Survey the Fireplace Wall and Identify the Masonry Assembly
Before planning a route, determine whether the brick is veneer, structural masonry, or part of a chimney or firebox. These assemblies have different roles, and their appearance alone may not tell you which one you have. Check the fireplace documentation and seek qualified review if the wall’s construction is unclear.
Look for the fireplace’s rating plate and locate its manual. The instructions identify required clearances and other limits for the appliance. Do not assume a TV is safe at a certain distance just because it sits outside the visible firebox: heat can affect nearby surfaces and cables.
Next, establish what the brick wall does. Brick veneer is a facing attached to another wall; structural masonry supports loads; a chimney or firebox is part of a heat- and fire-related assembly. These terms describe different construction, and a surface that looks like brick does not confirm which one is behind it.
Before drilling or cutting, check for hidden wiring, pipes, and other services using suitable locating methods. If the wall is a chimney, firebox, or structural masonry, do not remove mortar to create a chase without a qualified masonry assessment. The authority having jurisdiction (AHJ), usually the local code official, may also need to review work.
Next step: If you cannot confidently identify the wall and fireplace assembly, pause the plan and arrange a site assessment.
Plan a Mortar-Line Route Without Damaging the Wall
A mortar-line route follows the horizontal or vertical joints between bricks. The lowest-risk version is usually a surface-mounted raceway that sits over the joint; it does not require removing mortar. A recessed route removes material and needs professional review, since there is no universal safe chase depth or amount of mortar that can be cut.
Measure the route from the TV’s connection area to the equipment location. Include the cable’s bend needs and enough length to connect devices without tension. Plan accessible ends, and avoid covering a box or splice with mortar, trim, or the TV mount.
| Route option | Best fit | Main checks |
|---|---|---|
| Surface raceway over mortar | A visible, removable route is acceptable | Choose a product suitable for the location and cable; confirm its attachment method works on the brick |
| Recessed route in a mortar joint | Only after qualified review confirms the wall can be altered | Verify the assembly, approved path, accessible endpoints, and compatible repointing mortar |
| Route elsewhere | The brick is part of a chimney, firebox, or uncertain structure | Ask a qualified mason or installer to identify a safer path |
A surface raceway can be painted only if its manufacturer allows it. Choose a finish that blends with the brick or mortar, and follow the product instructions for preparation and attachment. Do not treat an ordinary plastic cover or an improvised groove as an approved wiring method.
Next step: Prefer an over-surface route unless a qualified professional confirms that recessing the joint is suitable.
Confirm Cable Separation, Access, and Fireplace Clearances
The route must suit each cable’s purpose. Low-voltage signal cables carry data or audio/video signals; power conductors supply electricity. They are not interchangeable, and one cable’s rating does not make another cable safe to conceal beside it.
Use signal cable marked for the installation environment and route, such as CL2 or CL3 where applicable. A plenum or riser location may call for a different rating. Check the cable listing, product directions, and local code requirements; the words “in-wall rated” alone do not confirm that a cable is right for every route.
Keep TV power cords and ordinary extension cords out of walls and mortar joints. NEC 400.12 does not permit flexible cords to be used as concealed building wiring. For concealed power, use a listed in-wall power relocation kit as directed, or have an electrician install a compliant branch-circuit receptacle.
NEC Article 725 generally covers many power-limited circuits, while Article 800 applies to communications circuits. NEC 725.136 addresses separation from power conductors. The often-quoted two-inch spacing is conditional, not a rule for every installation; the permitted separation depends on the wiring methods and applicable code. Crossing signal and power cables at 90 degrees may reduce parallel coupling, but does not by itself meet separation requirements.
Any junction or splice box must remain accessible after the work. NEC 314.29 requires access to boxes, so do not bury one behind brick, mortar, or a fixed finish. Also compare the cable’s temperature rating with expected wall temperatures and follow the fireplace manual’s clearance requirements.
Next step: Confirm cable ratings, separation method, box access, and fireplace clearances before installing anything.
Route Cables and Repoint the Mortar Joint
A surface raceway keeps the masonry intact and allows later access. A recessed route changes the wall and can affect its structural or fire performance. If a professional approves cutting a joint, follow their method and the applicable product and code instructions rather than using a generic depth or spacing rule.
For a surface route, dry-fit the raceway along the chosen joint first. Check that the TV and equipment cables reach without being stretched, sharply bent, or trapped by the mount. Use only the raceway’s approved attachment method for the brick surface.
For a recessed route, have a qualified mason assess the joint and confirm the proposed work will not compromise the assembly. If the route is approved, keep the signal cable in the specified path and protect it as required by the cable and raceway instructions. Do not place a power cord or extension cord in the channel.
If mortar is removed, repoint with mortar compatible with the existing masonry. The correct material and method depend on the brick and mortar; an incompatible repair can damage the masonry. Keep appliance openings clear, and leave access to any boxes or connections.
Illustrative job pattern: A homeowner wants the TV’s HDMI and network cables to disappear down a joint above a working fireplace. If the wall is confirmed as part of a chimney, cutting the joint is not a do-it-yourself shortcut. A surface raceway, or a route reviewed by a qualified mason, avoids assuming that the joint is safe to alter.
Illustrative job pattern: On a brick veneer wall away from the firebox, a surface raceway may offer a tidy route with no mortar removal. The installer still checks for hidden services, chooses cable with the correct rating, and keeps any concealed power solution separate and compliant.
Next step: Use a surface route where practical; treat any proposed mortar removal as a masonry alteration that needs review.
Verify Accessibility, Operation, and Temperature
A finished route is not complete until you confirm that connections remain reachable, cables work, and the fireplace can operate as intended. Check the installation against the cable and raceway instructions, the fireplace manual, and applicable local requirements.
With equipment disconnected as appropriate, inspect the full route for pinched, sharply bent, or strained cables. Confirm that each end reaches its device and that any box, splice, or access point remains accessible. Test the TV signal and connected devices before closing a removable raceway cover or finishing approved masonry work.
Operate the fireplace according to its manual and observe the area during use. Do not rely on a universal “safe TV temperature” or clearance; none applies to every appliance and wall. If the surface or cable temperature raises concern, stop using the setup and ask the appliance manufacturer or a qualified professional to assess it.
Also verify that the mount remains secure and that no new opening blocks a vent or appliance access point. If the work involved a chimney, firebox, structural masonry, or concealed power, obtain any required professional inspection or AHJ approval.
Next step: Confirm cable function, box access, fireplace operation, and temperature before treating the job as finished.
Frequently Asked Questions
These answers focus on the practical choices involved in routing TV signal cables over or through brick near a fireplace. Local code, product listings, and the fireplace manual control the final installation, so use these points as a guide rather than a substitute for site-specific review.
Can I run TV cables inside a mortar joint?
Not automatically. A joint may be part of structural masonry, a chimney, or a firebox assembly. Have the wall assessed before removing mortar; a surface raceway avoids cutting the joint.
Can I put the TV power cord in the mortar joint?
No. Do not conceal a TV flexible cord or ordinary extension cord in a wall or mortar joint. Use a listed in-wall power relocation kit as instructed or ask an electrician to install a compliant receptacle.
Is a surface raceway on brick acceptable?
It can be an option when the product is suitable for the location and installed as its instructions require. Choose a route and attachment method that fit the brick surface and the cable type.
What cable rating should I use?
Use cable listed for its specific route and environment. CL2 or CL3 may apply to some low-voltage runs, but plenum, riser, local code, and product requirements can change the rating needed.
Do I always need two inches between power and signal cables?
No. The commonly cited two-inch separation is conditional, not universal. NEC 725.136 and the adopted wiring rules determine the required separation or permitted method for the specific cables and installation.
Does crossing cables at 90 degrees make them code-compliant?
Not by itself. A right-angle crossing can reduce parallel coupling, but it does not remove code separation requirements.
Can I bury a splice behind mortar?
No. A junction or splice box must remain accessible under NEC 314.29. Do not cover it with mortar or another finish that prevents access.
How close can a TV be to a fireplace?
There is no single safe distance for every TV and fireplace. Follow the appliance manual and check the TV and cable temperature ratings; get qualified advice if heat exposure is uncertain.
Can I cut a shallow groove in the mortar myself?
Do not assume that a shallow cut is safe. There is no universal safe chase depth. Have a qualified mason review the assembly before any mortar is removed, especially on a chimney or firebox.
What is the safest first step?
Identify the wall assembly and fireplace, then check the manual and cable route. If the wall’s role is uncertain, arrange a qualified assessment before drilling or cutting.
A clean result starts with the right route, not with removing mortar. Keep power and signal wiring in their proper methods, preserve access, and do not alter fireplace or structural masonry without qualified review.
(This article was written by one of our staff writers, Michael Holloway. Visit our Meet the Team page.)





