How To Hide Water Heater In Garage (5+ Ways Explained)

The garage can be an unsightly place, with bulky objects strewn about seemingly in no particular order.

The water heater in particular can stand out like a sore thumb, its metallic cylinder towering among the wood and plastic of the rest of the space.

But this doesn’t need to be the case.

With some simple steps, the water heater can be concealed, allowing the garage to be a place of order and beauty.

There are a variety of ways to hide a water heater in the garage.

Shelving, cabinets, and a variety of other furniture pieces can be used to house the machine, allowing it to blend into the background of the space.

Other more creative techniques, such as using a curtain to conceal the heater, can also be used to achieve the same effect.

Regardless of the approach, a few simple steps can be taken to make the water heater a part of the garage, rather than an eyesore.

how to hide water heater in garage

Consider the Water Heater’s Location

Measuring the space available for installation of the water heater is the essential first step. Knowing the clearance requirements of the heater is also important to ensure proper installation and accessibility for maintenance. Finally, ensuring accessibility for maintenance is critical to ensure the efficient operation and longevity of the water heater.

Measure the Space

Having discussed the importance of properly sizing the water heater, it is also beneficial to consider the location of the heater. When selecting a space for the water heater, measuring the space available is the first step. Measure the area in all directions, including height, width, and depth. This will help determine what size water heater can fit in the space and what accessories the water heater may need, such as a stand or shelf. Additionally, make sure to measure the ceiling height and any additional obstructions in the space, such as heating ducts or pipes. Taking these measurements will ensure that the water heater will fit in the space without any issues. It is also important to keep in mind the potential need for accessibility for maintenance. Make sure the space chosen is easily accessible and that the water heater can be serviced without any difficulty. Selecting the perfect space for the water heater will make all the difference in having a safe and efficient installation.

Identify the Heater’s Clearance Requirements

Having considered the space available to install the new water heater, the next step is to identify the heater’s clearance requirements. It is important to take into account the area around the water heater, which may be used for storage, so that the unit can operate safely and efficiently. Clearance requirements for the water heater vary depending on the type, model, and size of the unit, and the environment in which it is installed.

When selecting a location for a water heater, it is essential to follow the manufacturer’s installation instructions to ensure the safety of those nearby. For example, the water heater should be placed at least two feet away from combustible surfaces, such as walls and furniture, to reduce the risk of fire. Additionally, the space around the water heater must be well ventilated to prevent the accumulation of hazardous gases released from the unit.

When determining the clearance requirements for the water heater, it is important to also consider the accessibility for maintenance. The water heater should be placed in an area that is relatively easy to access, so that workers can inspect and clean the unit, if necessary. This also enables them to replace the heater, if necessary, without having to move large pieces of furniture or perform any complex renovations. The ideal location should also have an adequate amount of space to work safely and efficiently.

Accessibility for maintenance

Once the space has been measured and the clearance requirements identified, it is important to ensure that the water heater is accessible for maintenance. The ideal location is one that allows easy access for the homeowner to check levels, clean out any sediment that may have built up, and to adjust the thermostat if necessary. To ensure easy access, the heater should be located in an open area, such as a basement, utility room, or garage.

It is important to keep in mind that the water heater should be located in a place that is also accessible to a plumber should any major repairs or maintenance need to be done. To make sure the heater is easy to reach, it should not be placed behind a wall or other large objects. The water heater’s size is also something to bear in mind when determining the location; if it is too large, it may not fit in the desired area.

Lastly, if the water heater is located in a cramped area or behind other objects, it may be difficult to access the heater’s components, such as the gas line, shutoff valve, and pressure relief valve, which are vital for its proper operation. If these components cannot be easily accessed, it could lead to major issues and even safety hazards. Therefore, it is important to make sure the water heater is located in an area that is free from clutter and allows easy access for any necessary repairs.

Choose a Cover

The choice of cover for any item is an important decision. For a long-lasting, durable cover, selecting a material that is strong and resistant to wear and tear is critical. An aesthetically pleasing decorative cover will add a touch of style to the item, while ensuring adequate ventilation is important to maintain freshness and prevent odors.

Select a Durable Material

With careful consideration of its location, it’s now time to choose a cover for your water heater. This cover should be durable, comfortable, and aesthetically pleasing. Selecting a durable material for your water heater cover is an important step in ensuring a long-lasting product.

When selecting a material, consider its water resistance. Does it repel moisture or allow it to seep in? A material that repels water is ideal for a water heater cover. Materials like vinyl and canvas are good water-resistant options. If you want something a bit more sturdy, metal or wood might be a better choice. Keep in mind, however, that these materials might require more maintenance than their water-resistant counterparts.

When selecting a material, also take into account the temperature of the room. Some materials, like metal, may become too hot to touch when the water heater is in use. Since the water heater will likely be in a space that is humid, see if the material is resistant to mold and mildew. Materials like vinyl, canvas, and even wood can be treated to be more resistant to moisture and heat.

Once you decide on a material, you can start to consider the aesthetic of the cover. A water heater cover should be both practical and visually pleasing, a perfect addition to any home.

Consider a Decorative Cover

Moving on from deciding on the ideal location for the water heater, it is now time to explore the options for selecting an appropriate cover. Consideration of a decorative cover adds a touch of personalization to any water heating system.

When choosing a decorative cover, it is important to select a material that is both durable and capable of withstanding the rigors of daily use. Materials such as stainless steel, aluminum, and brass are all suitable choices and will provide a layer of protection for the water heating system. These materials are also highly resistant to rust and corrosion, making them an ideal choice for covering the water heater.

Another factor to consider is the aesthetic appeal of the cover. Decorative covers come in a variety of styles and designs, from sleek and modern to rustic and vintage. This gives homeowners the opportunity to find a cover that best fits their style and ties in with the overall decor of the home. It is also possible to find covers with intricate designs and patterns, allowing homeowners to make a statement with their water heater. With so many options available, it is easy to find a cover that is both functional and visually appealing.

Ventilation Considerations

Safety is of the utmost importance when it comes to a water heater, and proper ventilation is paramount. Allowing air to circulate freely around the heater is paramount to preventing issues such as carbon monoxide build-up and reducing the risk of fires. To ensure that the heater is adequately ventilated, a cover that allows air to move through should be chosen.

To this end, the cover should be made of a material that is breathable, such as metal mesh, or a combination of metal and glass. The cover should be able to protect the heater from dust and debris, but should also stay cool enough to not cause a fire hazard. Furthermore, any vents that are built into the cover should be able to create enough of an air flow to allow the water heater to function efficiently.

It is also important to consider the size of the cover in relation to the water heater. The cover should be large enough to allow adequate air flow, but small enough so that it does not interfere with the heater’s function or the surrounding area. The cover should also be easy to install, so that the heater can be operated correctly and safely.

When selecting a cover for the water heater, it is important to keep in mind the need for proper ventilation. A breathable material should be chosen, and the cover should be the right size to prevent any interference with the heater’s functioning. Taking the time to ensure that the cover and the water heater work together to provide safe ventilation will go a long way towards keeping the heater functioning properly and safely.

Add a Curtain or Screen

Finding the perfect, airy curtain or screen to add to a space can be tricky. To begin, consider browsing options such as cloth curtains or mesh screens that can be found at home decor stores. Once an option is found, a DIY screen can be crafted with supplies like fabric, a dowel, and drapery clips. Once the screen is ready to display, install a rod or other hanging device to complete the look.

Find a Cloth or Mesh Curtain

After choosing the perfect cover for your window, you may want to consider adding a cloth or mesh curtain to complete the look. There are a variety of materials and designs available, so you can find one that fits your style and budget.

When shopping for a cloth or mesh curtain, the first step is to measure the length and width of your window. Knowing the size of your window will ensure that you purchase a curtain that fits properly. Additionally, consider the overall theme of the room when selecting a material. For a classic look, choose a linen or cotton blend. For a more modern look, try a sheer or embroidered fabric.

Finally, consider the color of the curtain. Choose a color that complements the window cover and the overall theme of the room. If you’re having trouble deciding, stick with neutral tones like beige, white, or gray. With a little research and patience, you can find the perfect cloth or mesh curtain to complete the look of your window.

Make a DIY Screen

If you’re looking for a creative way to add some privacy to your space, making a DIY screen is a great idea. Whether you want to create a modern look or use vintage materials, it’s easy to customize your design. And you won’t have to spend a fortune to get the look you want.

Gather the materials you’ll need to make your screen. Depending on the style you choose, you may need fabric, wood, bamboo, or vinyl. If you want to make sure your screen lasts, use sturdier materials such as wood or vinyl. If you’re looking for a lightweight option, fabric and bamboo are good choices.

Once you have all of your materials, it’s time to assemble the screen. If you’re using fabric, you’ll need to sew the pieces together. For the frame, you can use wood glue to join the pieces. If you’re using bamboo, you’ll need to tie the sticks together with twine. Finally, attach the fabric, vinyl, or bamboo to the frame with staples or glue.

When you’re done, you’ll have a unique screen that you can use to create privacy in your space. The great thing about a DIY screen is that you can customize it to fit your style. And with a little bit of effort, you can create a stunning look for your space.

Install a rod

Installing a rod is the finishing touch to create a cozy and inviting space. It is also the simplest way to hang a curtain or screen and separate a room. When it comes to installing a rod, there are a few things to consider.

First, decide where you want the rod to hang. Measure the distance between the two points where you want to hang the rod. Make sure to use a level to ensure the rod is straight and even. Once you have the measurements, purchase a rod that is wide enough to fit your curtain or screen and long enough to span the distance you measured.

Next, mount the rod onto the wall. Wall anchors and screws are the most common way to secure the rod. If the wall is made of drywall, make sure to use the correct wall anchors to support the rod’s weight. If the wall is made of brick or cement, use masonry anchors and screws. Before you begin drilling, make sure to use a drill bit that is the right size for the wall anchors and screws. Once the rod is installed, you can hang your curtain or screen.

Install a Cabinet

Measuring the heater’s dimensions is the first step to ensure the chosen cabinet will fit correctly; the next step is to purchase the right cabinet, taking into account the size and weight of the heater. Lastly, the cabinet must be secured in place to keep the heater safe and stable.

Measure the Heater’s Dimensions

Having added a curtain or screen to your heater, the next step is to install a cabinet. Before you begin the installation process, you must accurately measure the dimensions of your heater. This will ensure that the cabinet you choose is the appropriate size to fit your heater.

Measuring the size of your heater requires the use of a tape measure. Start by measuring the width and the depth of the area where the cabinet will be installed. You need to measure from the outer edges of the area, leaving at least an inch of space between the cabinet and the edges of the area. Knowing the exact width and depth of the area will help you decide on the perfect size of the cabinet.

Once you have the measurements, you need to determine the height of the area. This will help you decide on the height of the cabinet, as well as the height of the shelves within it. Make sure your measurements are precise, as the last thing you want is for your cabinet to not fit correctly.

Accurately measuring the dimensions of your heater is essential before purchasing and installing a cabinet. Doing so will ensure that the cabinet fits perfectly, creating a neat and orderly look in your home.

Purchase the Right Cabinet

Now that you have found the perfect spot for your cabinet, it’s time to purchase the one that is the right size. Start by measuring the dimensions of your heater to ensure that you buy a cabinet that fits. Measure the width, depth and height of your heater and jot down the measurements to bring with you when you go shopping.

When you set out to buy a cabinet, make sure to consider the material and style. Do you prefer a modern look or a classic one? Is your home more traditional or contemporary? Answering these questions can help you narrow down your choices. Additionally, if you have a limited budget, consider purchasing an unfinished cabinet and customizing it to match the style of your home.

Once you have made your selection, be sure to double-check that the dimensions are correct. If you buy a cabinet that is too small, your heater won’t fit and you’ll have to start all over again. You also want to make sure that you purchase the right hardware so you can securely mount the cabinet in place.

Secure the Cabinet in Place

Having measured the heater’s dimensions to make sure the cabinet will fit, it’s time to secure the cabinet in place. This is best done with two people, one to hold the cabinet up and the other to make sure it’s level and mark each spot where the cabinet will be secured. Any spacers or shims that are needed should be used to level the cabinet.

Using a drill or screwdriver, secure the cabinet to the wall by drilling the screws directly into the wall studs. If the cabinet has an adjustable shelf, it should be installed now. Then, make sure the cabinet doors open and close easily and are aligned properly. On the inside of the cabinet, attach any shelves or drawers to their brackets and then insert them into the cabinet. Once everything is in place, use a level to make sure the cabinet is still level and make any adjustments that are needed.

Finally, add any decorative trim or hardware that is desired to the cabinet. This will add some extra flair to the finished look. With the cabinet now securely in place, the heater can be safely installed and enjoyed for many years to come.

Create a Wall

Choosing the right building materials for the wall is essential for its successful construction. With the materials in hand, the wall can be built with precision and care, ensuring it is structurally sound and ready to be installed. The wall can then be seamlessly placed in its designated space, creating a secure and stylish perimeter.

Choose Building Materials

Having installed the cabinet, the next step in creating the wall is to choose building materials. It is important to select materials that will be strong and durable. When choosing materials, one should consider the type of wall that is being constructed, the size of the wall, and the environment in which it is being built.

When it comes to wall construction, drywall is the most common type of material used. It is lightweight, easy to install, and relatively affordable. The downside is that it can be damaged easily, so it is important to ensure that it is properly installed. Other materials that can be used include brick, stone, wood, and metal.

When selecting a material, it is important to consider the environment in which the wall will be located. For example, in a bathroom or kitchen, metal or stone might be the best choice due to their resistance to moisture. In an outdoor setting, brick or wood might be the best option because they are more durable and can withstand the elements.

No matter what material is chosen, it is important to select one that is fit for purpose, as it will determine the longevity of the wall. Taking the time to select the right material will ensure that the wall is strong and durable for years to come.

Build the Wall

Having successfully installed the cabinet, the next step is to build the wall. To begin, gather the necessary building materials, such as drywall sheets, screws, and wood studs. Measure the wall and cut the drywall to the appropriate size using a drywall saw. Then, attach the drywall to the wall studs using screws, making sure to evenly space them. For the highest quality results, use a power screwdriver. Finally, make sure that the screws are properly fastened and the drywall is securely attached to the wall studs.

Install the Wall

Having decided on the cabinet and the materials, it was time to install the wall. The process began by double-checking the measurements to ensure that the wall would fit the designated space perfectly. With the measurements finalized, it was time to begin constructing the wall.

Carefully, the wall was pieced together, making sure that each portion fit perfectly with the next. Once all the pieces were assembled, the wall was ready to be installed. Carefully, the wall was lifted and placed in the designated area, and secured firmly to the base. The wall was inspected to make sure that it was level and securely attached. Once the wall was in place, the final step was to finish the wall with the chosen materials.

The finishing touches were added as the wall was sealed with the chosen material, creating a seamless and polished look. The finished result of the wall was a beautiful addition to the space and the perfect companion to the cabinet.

Incorporate Shelving

Accurately measuring the space is critical for selecting the correct size of shelving. Once the right size is chosen, the shelves can be installed with ease, transforming the area into an organized and attractive space. With the right organization, the shelving can truly make a space shine.

Measure the Space

The wall may have been created, but it is still yet to be completed. To make the most of the space, it is important to measure the area in order to ensure that the right shelves are chosen for the job. Measuring the wall can be done in two ways.

The first way is to use a tape measure. The individual will need to take the measurements of the entire wall and make a note of the length and width. This will give a clear idea of the exact size of the wall. Additionally, if there are any obstructions, such as outlets or windows, these should be noted down as well so that the shelves can be adjusted to fit around them.

The second way is to use a digital measuring tool. There are several apps available that help to measure the wall quickly and accurately. By taking several pictures of the wall from different angles, the app can detect the dimensions and create a plan that can be used for the shelves.

Whichever method is chosen, it is important to take accurate measurements of the wall in order to choose the right shelves that will fit the space perfectly. With the measurements in hand, the next step is to choose the right shelves that will suit the wall.

Choose the Right Shelves

Now that you have measured the wall and determined the desired shelf placement, it’s time to choose the right shelves. There is a variety of materials to choose from, such as wood, metal, and plastic. Depending on your style, you can select shelves with a certain depth, color, and shape. Shelves come in many sizes, ranging from small corner shelves to large floating shelves. Additionally, you have the option of buying shelves that are equipped with drawers.

When selecting shelves, take into consideration the size of the items you would like to store. For instance, if you are looking to display large decorative items, choose shelves that are wide and deep enough. If you mainly plan to store books, then a more narrow shelf should suffice. Additionally, consider the weight of the items you will be storing. If you need to store heavier items, make sure the shelf material can handle the weight.

When selecting shelves, focus on the aesthetics of the room. Consider the color of the wall, as well as the furniture and other accessories in the room. If you are looking to create a modern look, choose shelves that come in sleek, dark colors. If you prefer a rustic farmhouse style, select shelves made of wood or metal. With a wide variety of materials to choose from, you are sure to find shelves that fit your style.

Install the Shelves

Now that you have measured the space and chosen the right shelves, it is time to install them. To begin, make sure you have all the necessary tools and supplies, including a power drill, wall-mounted drill bits, wall anchors, and a level. Then, mark the spot on the wall where you plan to attach the shelves.

Using the power drill, position the wall-mounted drill bit against the wall in the marked spot. Gently press the drill bit against the wall, and begin to drill in a slow, steady motion. Make sure to drill slowly, as too much pressure can damage the wall. Once you have drilled the hole, insert the wall anchor and use a screwdriver to secure the anchor in place.

Next, grab the shelf, line it up with the wall anchors, and use the screws to attach the shelf to the wall. Once the shelf is in place, use the level to ensure the shelf is properly aligned. Then, repeat the process for the remaining shelves, making sure that each shelf is level and secured properly.

Now that the shelves are attached to the wall, you can start to decorate and organize them as you please. From books to plants, the possibilities are endless, so have fun and get creative!

Put the Heater in a Closet

Accurately measuring the closet space is essential to ensure the heater fits snugly. Necessary adjustments can be made to shelves and other fixtures to create space for the heater. Securing the heater in place will ensure it stays firmly in the closet and remains safe.

Measure the Closet

Positioning a heater in a closet can be a daunting task. Taking careful measurements of the closet is the first step to ensuring that the heater can be properly installed. Measuring the closet requires a tape measure, a pencil, and paper to record measurements.

The most important measurement to take is the overall height of the closet. It’s important to measure from the floor to the ceiling, including any molding or trim. A standard closet is 8 feet tall, but some closets may vary. After measuring the height, move on to measuring the width of the closet. Record the measurements from side to side, then measure the depth of the closet from wall to wall, measuring at the back of the closet.

Next, measure the location of any shelving that is already installed in the closet, recording the measurements on paper. This will help determine the amount of space available for the heater, as well as provide a good reference for when it’s time to install the heater. It’s important to be as exact as possible when measuring the closet and the shelving, as this will help ensure that the heater fits properly. Taking these measurements is the first step to ensuring that the heater can be installed correctly.

Make Necessary Adjustments

Ahead of installing the heater, one must first measure the closet carefully. This step is important, as it will allow for any necessary adjustments that need to be made to ensure the heater fits snugly within the allotted space. It is crucial to make sure the measurements are accurate, as the wrong size of heater can cause serious problems.

The next step is to make any necessary adjustments. This may include removing some of the shelving that was installed in the closet, or cutting a larger opening in the wall to accommodate the heater. If it is necessary to remove any shelving, it is important to make sure to save the pieces in case they need to be re-installed after the heater is put in place.

It is also important to make sure that the heater is level before securing it. This can be done using a level and adjusting the feet of the heater accordingly. Once the heater is level, it must be secured to the floor and wall to make sure it does not move during use. This process should be done carefully and thoroughly to ensure the heater is safe and secure.

Secure the Heater

Finally, it was time to secure the heater in the closet. To ensure safety and prevent any damage to the closet, it was necessary to secure the heater to the wall. Taking a few measurements to ensure the heater wasn’t too close to the shelving, the next step was to attach the heater to the wall. The most efficient way to do this was to use some drywall anchors and screws. With the anchors in place, it was only a matter of screwing in the screws and tightening each one. Once the heater was tightly secured to the wall, the job was finished. The heater was now in its new home, and the closet was safe to use.

Cover with a Rug

Choosing the right rug for the task is essential; the texture, size, and material should be considered carefully. Once the perfect rug has been selected, it can be placed gently over the heater and secured in place using appropriate tacks. This will ensure the rug does not slip or slide, keeping the area safe and secure.

Select a Rug

As the final step in hiding the heater, selecting a rug to cover it is essential. The rug should be large enough to drape over the entire heater and the surrounding area. It should be made of a durable material that is resistant to heat and won’t catch fire if the heater were to overheat. It should also be thick enough to retain the warmth of the heater and insulate the closet from the cold air outside.

When selecting a rug for the closet, consider its design. A rug with a pattern or texture will help to create a stylish look as well as a feeling of coziness. Choose a rug with a hue that complements the closet’s color scheme, or one that will bring out the colors of the items stored within the closet. Alternatively, a rug with a neutral color palette will help keep the closet looking clean and tidy.

When selecting a rug, take measurements of the space around the heater, as well as the dimensions of the heater itself, to make sure the rug will fit properly. For a snug fit, select a rug that is slightly larger than the measurements taken. Keep in mind that the rug may appear smaller once draped over the heater and other items in the closet. Taking the time to select the right rug will help to ensure the space looks nice and is comfortable to use.

Place the Rug Over the Heater

To complete the task of covering the heater with a rug, the next step is to place the rug over the heater. To ensure the rug fits correctly, measure the dimensions of the closet and the area the heater will take up. Subsequently, select a suitable rug that will fit the space and provide the desired insulation. A rug with a thicker pile will be more effective in providing insulation. Additionally, it is important to choose a rug with a fire-resistant material to prevent any risk of fire.

Once the correct rug is chosen, carefully lay the rug over the heater, ensuring the edges of the rug are tucked in and the rug is level. Make sure the rug is not too tight as this can cause the heater to overheat. Moreover, the rug must not be too loose as this can be a safety hazard. To secure the rug in place, use staples or tape to hold the rug down. This will prevent the rug sliding and any further risk of fire.

When the rug is correctly placed, the heater will be covered and insulated. This will not only improve safety, but also help keep the closet warm and comfortable.

Secure the Rug in Place

Finally, secure the rug in place by adding a few strips of adhesive hook and loop fasteners. This will help keep the rug in place and prevent it from slipping off the heater. Attach the hook side of the fastener to the back of the rug, and the loop side of the fastener to the wall of the closet, or wherever it feels secure. Fasteners come in different sizes, colors, and textures; find one that fits your aesthetic.

The hook and loop fasteners can also help protect the heater from the rug fibers. Rubbing against the heater can cause the rug fibers to get stuck in the vents, and clog it. This can cause the heater to malfunction. The fasteners will help keep the rug away from the heater, while still keeping it in place.

These steps are simple and easy to do, and can help make an old heater look brand new. With a rug covering it, the heater can blend in with the décor of the closet. Now that the heater is covered, you can enjoy the warmth and comfort it provides without sacrificing the appearance of the closet.

Conclusion

No matter the size of your garage, there is always a way to hide your water heater. With the right cover or curtain, a cabinet or wall, and even a closet or rug, your water heater can be tucked away in a safe and un-obtrusive spot. By taking the time to find the best option for your space, your garage can be a more aesthetically pleasing and organized area. With a bit of creativity, the water heater will blend into the background and become an unnoticed part of the landscape.

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *