What Is Diversion Safe Fabrication? (Can Safes)

A can safe is an ordinary, can-shaped container fitted with a removable inner compartment for small valuables. Fabrication means measuring the actual opening, making a stable insert, protecting every cut edge, and checking the storage location. It is a diversion container, not a certified burglary- or fire-resistant safe, and it must not create a building or electrical hazard.

An expert tip: measure the can’s narrowest opening before you design the insert. A container’s listed or nominal size does not tell you the clear space inside, and an insert that is even slightly too wide can bind or damage the can when removed. I treat the real container, its intended shelf, and the storage location as one project.

Planning the Container and Storage Location

A can safe is a movable household container, not a built-in compartment. No generally applicable IRC or IBC dimension or fabrication standard governs this type of item. Use the container and shelf makers’ limits, keep the exterior unmodified, and do not describe the result as a certified safe.

Start with the contents and the location. This approach suits small, ordinary items that can tolerate normal indoor conditions. It does not make the contents fireproof, waterproof, or secure against someone who knows what to look for. If you need tested burglary resistance or fire protection, choose a product with a rating that fits that need.

Before measuring or cutting, check the planned storage spot for:

  • Electrical equipment and required access around it.
  • Heat, moisture, and direct sunlight.
  • Shelf capacity and stability.
  • Children’s access and the chance someone might mistake the container for food.
  • Required egress paths, ventilation openings, and access to safety equipment.

Do not cut or alter rated walls, doors, structural members, or fire-rated assemblies to make a concealed space. Keep the project movable and separate from the building structure. If you are uncertain whether an area is part of a rated assembly or a required access path, ask the local building official or a qualified trade professional before proceeding.

A metal can is not a protective enclosure for hazardous contents. Do not store lithium-ion batteries, aerosols, solvents, or other flammable or heat-sensitive materials in it. A sealed container has no tested thermal protection and can worsen heat or pressure hazards.

Measuring the Opening and Checking Clearances

The usable opening is the narrowest clear path an insert must pass through. Measure that path and the inner cavity, not just the outside diameter or the label size. Also check the shelf rating and nearby equipment clearances before deciding on a final insert size.

Use a ruler or caliper to measure the internal diameter at several points, since a can may not be perfectly round. Measure the narrowest clear opening separately. If the top has a rolled rim or an inward lip, that feature can limit passage even when the cavity below is wider.

For a simple cylindrical insert, a practical project target is 2–3 mm of radial clearance between the insert and shell. Radial clearance is the gap on each side, not the total difference in diameter. For example, a 70 mm insert inside a true 74 mm opening has about 2 mm of clearance per side. Treat this as a fit target, not a code requirement, and check it against the actual can.

CheckWhat to measure or verifyPractical result
Clear openingNarrowest inside width the insert must pass throughInsert must pass without forcing
Inner cavityWidth and depth at the intended insert positionInsert fits without jamming
Fit allowanceRadial gap between insert and shellTarget 2–3 mm per side
ShelfPublished load rating and current loadTotal remains within the rating
Electrical equipmentRequired working-space depth and accessNo storage in required workspace

Where electrical equipment is involved, NEC 110.26(A)(1) generally calls for 36 in. (914 mm) of working-space depth for equipment rated 0–150 volts to ground, subject to the applicable conditions. Required depth can vary with voltage and the conditions in the code. Do not put the can or other stored items in that space. Check the locally adopted electrical code and ask a licensed electrician if the equipment or clearance is uncertain.

Fabricating and Finishing the Removable Insert

A removable insert is a separate inner compartment that fits inside the can and can be taken out without damaging the shell. Choose a compatible, non-fragile material, size it to the measured opening, and secure it against tipping or shedding parts. Every cut edge must be deburred and covered with mechanically retained edge trim.

Make a simple template first. Cardboard can help check the shape and passage through the opening, but it is not a durable final insert. Select a material that will hold its shape in the expected indoor conditions and will not crack during ordinary handling. Avoid brittle parts that could break inside the can.

Build and test in this order:

  1. Record the narrowest opening and the inner dimensions where the insert will sit.
  2. Cut a test pattern and confirm it passes through the opening.
  3. Make the insert, allowing for the target clearance on each side.
  4. Test removal and reinsertion before adding contents.
  5. Make sure the insert cannot tip, snag, or shed loose parts during normal handling.
  6. Deburr every cut edge and cover it with mechanically retained edge trim.

Deburring means removing sharp burrs left by cutting or drilling. Do not rely on paint, tape, or a thin coating to make a sharp edge safe. Reject or rework parts with exposed sharp edges, and handle cut metal with suitable protective equipment.

Keep the container’s exterior and label intact rather than modifying building finishes or making structural changes. If the can held food, do not use it for food again after fabrication. Keep a private note or other discreet record identifying the item so that no one mistakes its contents for consumable food.

Verifying Fit, Load, and Safe Use

Final checks confirm that the insert works as intended and that the filled container is safe to store. Keep the total weight within the shelf maker’s published load rating. Confirm the can stays stable, does not block required access or ventilation, and can be removed without forcing or sharp-edge contact.

Do not assume a shelf can hold a particular weight because it looks sturdy. Find the manufacturer’s rating and account for the container plus its contents and any other items on the shelf. If there is no rating, avoid loading the shelf heavily; use a location with a known, suitable capacity or get professional advice.

Use this final checklist:

  • The insert passes through the narrowest opening without force.
  • It can be removed and replaced without binding.
  • No cut edge is exposed.
  • The insert stays in place during normal handling.
  • The filled can is stable and within the shelf’s published limit.
  • The container does not block electrical workspace, ventilation, egress, or safety equipment.
  • The contents are not hazardous, heat-sensitive, or food.
  • The location is dry and away from heat sources.

A container that fits on a shelf may still be in the wrong place. Electrical working space is reserved for safe operation and servicing; it is not storage space. Likewise, do not place a can where it could obstruct an exit or prevent access to a fire extinguisher, panel, or other safety equipment.

Fabrication Scenarios and Comparison

These examples are planning scenarios, not reports of specific client installations. They show how the same measurement and safety checks apply to different ordinary containers. The key distinction is the opening and location, not whether the container looks suitable from the outside.

ScenarioFabrication decisionMain check
Wide-mouth metal can on a rated pantry shelfMake a removable insert after measuring the mouth and cavityShelf limit, edge protection, food-use warning
Narrow-mouth can in a closetUse a smaller insert that clears the narrowest openingTest full removal before adding contents
Container near an electrical panelChoose another storage locationPreserve required working space and access
Can intended for batteries or aerosolsDo not use as the storage solutionHeat and pressure hazards; no tested protection

For the wide-mouth example, I would first check that the shelf has a published load limit, then make a template to test the insert’s size. For the narrow-mouth example, the insert must pass through the mouth; a wide cavity below does not solve a too-small opening. For the panel example, the correct fabrication decision is to move the container, not work around the required access area.

Conclusion

Can safe fabrication means fitting a removable insert into an ordinary container while respecting the container’s real dimensions and the storage location’s limits. Measure the narrowest opening, aim for 2–3 mm of radial clearance, protect all cut edges, and stay within the shelf rating. Keep the item away from hazards and required access areas. It remains a diversion container, not a certified safe.

FAQ

What is diversion safe fabrication?
It is the process of fitting a removable inner compartment into an ordinary container, such as a can. The result may hold small valuables during routine storage, but it is not certified for burglary or fire resistance.

Is a can safe a real safe?
No. Unless a product has been tested and certified for a stated purpose, do not treat it as a burglary-resistant or fire-resistant safe. A repurposed can offers no tested protection.

How much clearance should the insert have?
A useful project target is 2–3 mm of radial clearance between the insert and the can. Measure the actual opening and inner dimensions first, since nominal can sizes do not show usable internal space.

Should I size the insert to the can’s advertised diameter?
No. Measure the narrowest clear opening and the cavity where the insert will sit. The insert has to pass through the opening, which may be smaller than the inner space below it.

How do I make cut edges safe?
Deburr every cut edge, then cover it with mechanically retained edge trim. Do not leave sharp edges exposed or rely on paint or tape alone to make them safe.

Can I store a can safe on any shelf?
No. Keep the filled container within the shelf maker’s published load rating and confirm the shelf is stable. If there is no known rating, do not assume it can support a heavy load.

Can I place one near an electrical panel?
Do not put stored items in required electrical working space. NEC 110.26(A)(1) generally requires 36 inches of working depth for equipment rated 0–150 volts to ground, though conditions and voltage can change the applicable depth.

Can I store batteries or aerosols in a sealed can?
No. A sealed metal can is not tested thermal protection and may worsen heat or pressure hazards. Do not use it for lithium-ion batteries, aerosols, solvents, or other flammable or heat-sensitive materials.

Can I cut a wall to install a hidden can safe?
This guide does not recommend that. Do not cut or alter rated walls, doors, structural members, or fire-rated assemblies to create a concealed compartment.

Should the can be used for food afterward?
No. Once you have modified or fitted the container for this purpose, do not use it for food. Keep a private record of its intended contents so it is not mistaken for consumable food.

(This article was written by one of our staff writers, Garrett Vance. Visit our Meet the Team page.)

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *