What Is Paint Reflectance? (LRV Values)
Paint reflectance, usually given as a light reflectance value (LRV), describes how much visible light a painted surface reflects on a scale from 0 to 100. Use LRV to compare specified colors, not to predict appearance by color name alone. Check the measurement basis, assess samples under project lighting, and verify the cured finish before approving it.
LRV helps when a room feels too dark, when two surfaces need to look distinct, or when a project specification calls for a measurable color property. It is a useful number, but it is not a complete description of how a wall will look. Lighting, sheen, texture, and neighboring colors all affect what you see.
The scale itself is a helpful statistic: 0 represents ideal black and 100 represents ideal white. Real paint products have values within that range. I treat LRV as a comparison and specification tool, then confirm the paint on site. Building on this, the sections below explain how to select comparable values, apply them, and verify the result.
Establish the Purpose and Applicable Requirements
LRV is most useful when you know why you are comparing surfaces. You may be planning light levels, documenting a color specification, or seeking visual distinction between adjoining areas. Set that purpose first, then check whether the project has separate code, contract, or accessibility criteria.
In the United States, LRV is not generally prescribed by the International Residential Code (IRC) or International Building Code (IBC). Do not assume that a particular LRV or difference between two values meets a code requirement. Check the adopted code, local amendments, contract documents, and any applicable accessibility provisions for the project.
For visual distinction, calculate the absolute difference:
LRV difference = |LRV₁ − LRV₂|
The result is a difference in LRV points, not a percentage contrast ratio. For example, values of 72 and 42 differ by 30 points. That calculation is accurate, but it does not prove that a person will reliably distinguish the surfaces or that they meet an accessibility requirement.
| Purpose | What LRV can help you do | What else to check |
|---|---|---|
| Compare two specified colors | Calculate their LRV point difference | Color, lighting, sheen, and texture |
| Plan a room’s finish palette | Compare the relative reflectance of surfaces | Window direction, electric lighting, and sample appearance |
| Meet a project specification | Record and verify the required product value | The project’s stated test basis and approved substitutions |
| Support accessibility or wayfinding | Provide one colorimetric input | Applicable standards and the full installed condition |
A number alone cannot establish safe visual contrast. Lighting level, glare, gloss, texture, viewing angle, and adjacent colors can change how much contrast a person perceives. If an accessibility or wayfinding requirement applies, use its specified method and criteria rather than substituting a general LRV rule.
Compare LRV Values and Confirm the Measurement Basis
LRV corresponds to the CIE Y light-reflectance value, reported on a 0–100 scale. CIE Y represents a colorimetric measure of visible light response, not a simple reading of paint color or brightness on a screen. Results depend on measurement conditions, including the illuminant and observer used.
For a stated LRV test method, BS 8493:2008+A1:2010 is a relevant standard. In the United States, ASTM E1164 covers obtaining spectrometric data, while ASTM E308 covers computing CIE tristimulus values. These standards describe technical measurement and calculation methods; they do not make an unmeasured fan deck or digital swatch a reliable LRV source.
Start with the paint manufacturer’s published value for the exact color and formula. Confirm that the value applies to the product you plan to use, and record its source and test basis when the project requires traceability. A value for a similar color, another product line, or another formula is not automatically interchangeable.
If no published value is available, or the number is critical to a specification, arrange measurement of a representative, fully cured sample using a documented method. A spectrophotometer can measure a sample, but the instrument, setup, sample preparation, and reporting conditions matter. Ask the laboratory or supplier how the result was obtained.
Use the following sequence to keep comparisons meaningful:
- Identify the exact paint product, color, and formula for each surface.
- Obtain manufacturer LRV data and note its source and stated basis.
- Compare values only when the data are suitable for the decision at hand.
- If values are missing or critical, measure representative cured samples with a documented method.
- Record the LRV difference as points, not as a contrast ratio.
| Illustrative values | Calculation | Difference |
|---|---|---|
| Sample A: 82; Sample B: 48 | |82 − 48| | 34 points |
| Sample C: 48; Sample D: 12 | |48 − 12| | 36 points |
| Sample E: 64; Sample F: 59 | |64 − 59| | 5 points |
These figures are examples for understanding the calculation, not product recommendations or code thresholds. Two pairs with similar point differences may still look different in a space because hue, lighting, sheen, and surface texture vary. Use the calculation to compare data, then judge the installed appearance.
Select, Sample, and Apply the Paint System
Selecting paint by LRV means using a published or measured value to narrow choices, then assessing the actual color and finish. The paint system includes the product, color formula, sheen, substrate, preparation, and application. Each can affect the finished surface, so a listed color value should not replace an on-site sample.
Begin by identifying the surfaces you are comparing and the goal for each. For daylight planning, consider the whole room and its lighting. For visual distinction, confirm whether a project standard sets specific criteria. For a documented specification, identify what product substitutions and measurement evidence the project permits.
Then compare manufacturer values for the exact colors. Do not choose solely from a color name, fan deck, or screen image. Displays vary, and a screen does not measure a painted surface’s reflectance. A fan deck can help you choose a color, but it is not a measurement of the installed coating.
Test the chosen colors on representative areas or sample boards. Use the intended primer and paint system, and follow the manufacturer’s instructions for substrate preparation, number of coats, and drying or curing. Review the samples under the project’s actual lighting and from normal viewing positions. A sample painted on a different substrate may not match the final surface.
Illustrative case study: adjoining corridor surfaces. Suppose a project team is comparing two colors with published LRVs of 72 and 42. The difference is 30 points. I would document the values and the source, then place cured samples side by side in the corridor’s installed lighting. If the surfaces need to satisfy an accessibility criterion, I would check the project’s applicable requirement separately; the 30-point difference does not establish compliance.
Illustrative case study: low-light room. A homeowner compares two paint options with values of 64 and 59. The five-point difference tells them the listed reflectance values are close. It does not guarantee a subtle or pleasing match in the room. They should review samples under the room’s lights, since the color and finish can affect perceived contrast.
Before ordering or applying the final paint, confirm:
- Exact product, color name, and formula
- Published LRV or documented measurement method
- Substrate and preparation requirements
- Intended sheen and application instructions
- Sample approval under relevant lighting
- Project-specific requirements for accessibility or contrast
Verify the Cured Finish Under Installed Lighting
Verification means checking the finished paint after it has cured, under the lighting and viewing conditions where it will be used. Compare the installed surface with the approved sample and project documents. Record the product, color, finish, and LRV source so future repairs or substitutions can be checked against the same specification.
Wet paint is not a dependable basis for judging the final appearance. Follow the manufacturer’s instructions for drying and cure time before evaluating the finish. The substrate, primer, application, and sheen can affect the finished surface, so an approved sample should represent the planned paint system as closely as practical.
View the cured surface in daylight and with the installed electric lighting, if both apply. Check from typical viewing angles and note glare, texture, and nearby colors. If the result appears different from the approved sample, first confirm that the product, color formula, finish, substrate, and application match the approved details.
For a project requiring measured verification, arrange measurement of a representative cured area or sample under a documented method. Keep the report with the project record. If a substitution is proposed, compare its exact product data and confirm that the project team accepts it; a similar color name is not proof of an equivalent LRV.
A useful record includes:
- Manufacturer and full product identification
- Color name and formula
- Sheen and substrate
- Published LRV source or measurement method
- Sample approval date and lighting conditions
- Approved substitutions or field changes
This process makes future touch-ups and reviews easier. It also helps distinguish a genuine product or application change from a difference caused by lighting or viewing conditions.
Frequently Asked Questions
These answers explain what LRV can tell you, how to compare values, and where its limits matter. Use them as a quick reference, not as a substitute for product instructions, project specifications, or any applicable accessibility standard.
What does LRV mean in paint?
LRV means light reflectance value. It reports a paint color’s CIE Y value on a conventional scale from 0 for ideal black to 100 for ideal white.
Is LRV the same as brightness?
No. LRV is a colorimetric value. The perceived brightness of a painted surface also depends on lighting, sheen, texture, viewing angle, and nearby colors.
How do I calculate the difference between two LRV values?
Subtract one value from the other and take the absolute value: |LRV₁ − LRV₂|. Report the result in LRV points, not as a percentage contrast ratio.
Does the IRC or IBC require a minimum LRV?
LRV is not generally prescribed by the IRC or IBC. Check the adopted code, local amendments, contract documents, and project-specific requirements.
Does a larger LRV difference guarantee accessibility contrast?
No. LRV difference alone does not establish accessibility compliance or safe visual contrast. Use the applicable project standard and assess the installed conditions.
Can I use a color name to determine LRV?
No. Color names do not establish an LRV. Use published data for the exact product and formula, or have a representative cured sample measured.
Can I use a phone or computer screen to judge LRV?
No. A screen image is not a measurement of a painted surface and can vary by display and settings. Use product data or documented instrument measurement.
Does sheen change the appearance of LRV?
Sheen can change perceived appearance, especially through reflections and glare. Assess the intended finish on a sample under project lighting; do not rely on sheen to infer an LRV.
Should I measure wet paint?
No. Use manufacturer data or measure a representative, fully cured sample. Follow the paint maker’s instructions for drying and curing before evaluation.
What should I record for a paint specification?
Record the product, color and formula, finish, substrate, LRV source or measurement method, sample approval, and any approved substitutions.
(This article was written by one of our staff writers, Garrett Vance. Visit our Meet the Team page.)






